The 2019 Volkswagen Caddy SWB TDI250 is a front-wheel drive three-door van that was released to the Australian market on 274th October 2018
classified as a 2K MY19. The Volkswagen Caddy is regarded as a 3d van built in Germany with prices from a dealer as a used car starting at $20,500.
The Volkswagen Caddy is a front-wheel drive 3 door with 2 seats, powered by a 2.0L DIESEL TURBO 4 engine that has 75 kW of power (at 2900 rpm) and 250 Nm of torque (at 1300 rpm) via a Six-speed Auto Direct Shift. Volkswagen claims the Caddy SWB TDI250 uses 5.3L/100km of Diesel in the combined city and highway cycle while putting out 140g of CO2. It has a 55L fuel tank, meaning it should be able to travel 1038km per full tank.
The Volkswagen Caddy measures 1823mm (71.8 inches) in height, 4408mm (173.5 inches) in length, 1793mm (70.6 inches) in width with a 2682mm (105.6 inches) wheelbase that brings about a total of 1401kg (3088.7 lbs) of unladen weight. The Caddy SWB TDI250 comes standard with 195/65 R15 front tyres and 195/65 R15 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2019 Volkswagen Caddy SWB TDI250 has a 175mm ground clearance with a 1400kg braked and 700kg unbraked towing capacity.
The VIN number can be found on the Drive Side Luggage Compartment and the compliance plate is located on the On C-Pillar Behind LH Door. An example VIN number would be similar to WV2ZZZ2KZGX123456.
