The 2019 Toyota HiLux WORKMATE is a rear-wheel drive C/chas that was released to the Australian market on 213th August 2018
classified as a TGN121R MY19. The Toyota HiLux is regarded as a c/chas built in Thailand with prices from a dealer as a used car starting at $20,900.
The Toyota HiLux is a rear-wheel drive 2 door with 2 seats, powered by a 2.7L INLINE 4 engine that has 122 kW of power (at 5200 rpm) and 245 Nm of torque (at 4000 rpm) via a Five-speed Manual. Toyota claims the HiLux WORKMATE uses 11.1L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 259g of CO2. It has a nullL fuel tank.
The Toyota HiLux measures 1690mm (66.5 inches) in height, 5330mm (209.8 inches) in length, 1800mm (70.9 inches) in width with a 3085mm (121.5 inches) wheelbase that brings about a total of 1490kg (3284.9 lbs) of unladen weight. The HiLux WORKMATE comes standard with 215/65 R16 front tyres and 215/65 R16 rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 60 month, unlimited kmkm warranty.
The 2019 Toyota HiLux WORKMATE has a 0mm ground clearance with a 2500kg braked and 1225kg unbraked towing capacity. It has a final gear ratio of 4.1.
The Toyota HiLux has received a 5 star rating from ANCAP. The VIN number can be found on the Right Rear Chassis Rail and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to MR0EX3CB900000001.
