The 2013 Navara Nissan
RX (4x4) is a four-wheel drive cab chassis that was released to the Australian market on 32nd February 2012
classified as a D40 MY12. The Nissan Navara is regarded as a c/chas built in Thailand with prices from a dealer as a used car starting at $17,600.
The Nissan Navara is a four-wheel drive 2 door with 3 seats, powered by a 2.5L DIESEL TURBO 4 engine that has 106 kW of power (at 4000 rpm) and 356 Nm of torque (at 2000 rpm) via a Six-speed Manual. Nissan claims the Navara RX (4x4) uses 9.3L/100km of Diesel in the combined city and highway cycle while putting out 250g of CO2. It has a 80L fuel tank, meaning it should be able to travel 860km per full tank.
The Nissan Navara measures 1755mm (69.1 inches) in height, 5135mm (202.2 inches) in length, 1795mm (70.7 inches) in width with a 3200mm (126.0 inches) wheelbase that brings about a total of 1630kg (3593.5 lbs) of unladen weight. The Navara RX (4x4) comes standard with 205 R16 front tyres and 205 R16 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, 100km warranty.
The 2013 Nissan Navara RX (4x4) has a 190mm ground clearance with a 3000kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.538.
The VIN number can be found on the Mid Driver Side Chassis and the compliance plate is located on the Lower Pass Side Centre Pilla. An example VIN number would be similar to MNTACUD40A0123456.
