The 2013 Navara Nissan
DX (4x2) is a rear-wheel drive cab chassis that was released to the Australian market on 91st April 2011
classified as a D22 SERIES 5. The Nissan Navara is regarded as a c/chas built in Japan with prices from a dealer as a used car starting at $11,100.
The Nissan Navara is a rear-wheel drive 2 door with 3 seats, powered by a 2.5L DIESEL TURBO 4 engine that has 98 kW of power (at 3600 rpm) and 304 Nm of torque (at 2000 rpm) via a Five-speed Manual. Nissan claims the Navara DX (4x2) uses 7.3L/100km of Diesel in the combined city and highway cycle while putting out 193g of CO2. It has a 75L fuel tank, meaning it should be able to travel 1027km per full tank.
The Nissan Navara measures 1620mm (63.8 inches) in height, 4795mm (188.8 inches) in length, 1690mm (66.5 inches) in width with a 2950mm (116.1 inches) wheelbase that brings about a total of 1509kg (3326.8 lbs) of unladen weight. The Navara DX (4x2) comes standard with 195 R15 front tyres and 195 R15 rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 36 month, 100km warranty.
The 2013 Nissan Navara DX (4x2) has a 225mm ground clearance with a 1500kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 4.375.
The Nissan Navara has received a 3 star rating from ANCAP. The VIN number can be found on the Mid Driver Side Chassis and the compliance plate is located on the Driver Side Eng Scuttle. An example VIN number would be similar to JN1CPGD22A0123456.
