The 2018 Mazda CX-3 S TOURING (FWD) is a front-wheel drive four-door wagon that was released to the Australian market on 213th August 2018
classified as a DK MY19. The Mazda CX-3 is regarded as a 4d wagon built in Japan with prices from a dealer as a used car starting at $22,100.
The Mazda CX-3 is a front-wheel drive 4 door with 5 seats, powered by a 2.0L INLINE 4 engine that has 110 kW of power (at 6000 rpm) and 195 Nm of torque (at 2800 rpm) via a Six-speed Automatic. Mazda claims the CX-3 S TOURING (FWD) uses 6.3L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 143g of CO2. It has a 48L fuel tank, meaning it should be able to travel 762km per full tank.
The Mazda CX-3 measures 1535mm (60.4 inches) in height, 4275mm (168.3 inches) in length, 1765mm (69.5 inches) in width with a 2570mm (101.2 inches) wheelbase that brings about a total of 1297kg (2859.4 lbs) of unladen weight. The CX-3 S TOURING (FWD) comes standard with 215/50 R18 front tyres and 215/50 R18 rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2018 Mazda CX-3 S TOURING (FWD) has a 160mm ground clearance with a 1200kg braked and 640kg unbraked towing capacity. It has a final gear ratio of 4.325.
The Mazda CX-3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to MM0DK2W7A0W123456.
