The 2018 Mazda Bt-50
XT HI-RIDER (4x2) is a rear wheel drive Dual Cab Chassis that was released to the Australian market on 7th January 2017
classified as a MY17 UPDATE. The Mazda Bt-50 is regarded as a pick up or cab chassis 4x2 built in Thailand with prices from a dealer as a used car starting at $25,500.
The Mazda Bt-50 is a rear wheel drive 4 door with 5 seats, powered by a 3.2L Diesel Turbo 5 Cylinder engine that has 147 kW of power (at 3000 rpm) and 470 Nm of torque (at 1750 rpm) via a 6 Speed Manual. Mazda claims the BT-50 XT HI-RIDER (4x2) uses 8.4L/100km of diesel in the combined city and highway cycle while putting out 222g of CO2. It has a 80L fuel tank, meaning it should be able to travel 952km per full tank.
The Mazda Bt-50 measures 1815mm (71.5 inches) in height, 5373mm (211.5 inches) in length, 1850mm (72.8 inches) in width with a 3220mm (126.8 inches) wheelbase that brings about a total of 1832kg (4038.9 lbs) of unladen weight. The BT-50 XT HI-RIDER (4x2) comes standard with 255/70 R16 front tyres and 255/70 R16 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, 100km warranty.
The 2018 Mazda Bt-50 XT HI-RIDER (4x2) has a 232mm ground clearance with a 3500kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.550.
The Mazda Bt-50 has received a 5 star rating from ANCAP. The VIN number can be found on the Centre Of Chassis Frame and the compliance plate is located on the Lower Driver Side B-Pillar. An example VIN number would be similar to MM0UP0Y#$00123456.
