The 2016 BT-50 Mazda
XT HI-RIDER (4x2) is a rear-wheel drive cab chassis that was released to the Australian market on 244th September 2015
classified as a MY16. The Mazda BT-50 is regarded as a c/chas built in Thailand with prices from a dealer as a used car starting at $17,200.
The Mazda BT-50 is a rear-wheel drive 2 door with 3 seats, powered by a 2.2L DIESEL TURBO 4 engine that has 110 kW of power (at 3700 rpm) and 375 Nm of torque (at 1500 rpm) via a Six-speed Automatic. Mazda claims the BT-50 XT HI-RIDER (4x2) uses 7.6L/100km of Diesel in the combined city and highway cycle while putting out 239g of CO2. It has a 80L fuel tank, meaning it should be able to travel 1053km per full tank.
The Mazda BT-50 measures 1703mm (67.0 inches) in height, 5124mm (201.7 inches) in length, 1850mm (72.8 inches) in width with a 3220mm (126.8 inches) wheelbase that brings about a total of 1619kg (3569.3 lbs) of unladen weight. The BT-50 XT HI-RIDER (4x2) comes standard with 215/70 R16 front tyres and 215/70 R16 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, 100km warranty.
The 2016 Mazda BT-50 XT HI-RIDER (4x2) has a 201mm ground clearance with a 2500kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.31.
The Mazda BT-50 has received a 4 star rating from ANCAP. The VIN number can be found on the Centre Of Chassis Frame and the compliance plate is located on the Lower Driver Side B-Pillar. An example VIN number would be similar to MM0UP0Y#$00123456.
