1. Home
    2. Research
    3. Toyota
    4. Kluger
    5. 2013
    6. Price & Specs
    7. ALTITUDE (FWD) 7 SEAT
    Toyota Kluger

    2013 Toyota Kluger Altitude (fwd) 7 Seat Pricing and Spec

    From

    $24,600

    excl. on-roads

    Overview

    The 2013 Toyota Kluger ALTITUDE (FWD) 7 SEAT is a front wheel drive 4 Door Wagon that was released to the Australian market on 8th January 2012 classified as a GSU40R MY12. The Toyota Kluger is regarded as a SUV large built in Japan with prices from a dealer as a used car starting at $24,600.

    The Toyota Kluger is a front wheel drive 4 door with 7 seats, powered by a 3.5L V6 engine that has 201 kW of power (at 6200 rpm) and 337 Nm of torque (at 4700 rpm) via a 5 Speed Automatic. Toyota claims the Kluger ALTITUDE (FWD) 7 SEAT uses 11.0L/100km of unleaded petrol in the combined city and highway cycle while putting out 259g of CO2. It has a 72L fuel tank, meaning it should be able to travel 655km per full tank.

    The Toyota Kluger measures 1730mm (68.1 inches) in height, 4785mm (188.4 inches) in length, 1910mm (75.2 inches) in width with a 2790mm (109.8 inches) wheelbase that brings about a total of 1930kg (4254.9 lbs) of unladen weight. The Kluger ALTITUDE (FWD) 7 SEAT comes standard with 245/55 R19 front tyres and 245/55 R19 rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 36 month, 100km warranty.

    The 2013 Toyota Kluger ALTITUDE (FWD) 7 SEAT has a 206mm ground clearance with a 2000kg braked and 700kg unbraked towing capacity. It has a final gear ratio of 3.478.

    The Toyota Kluger has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Driver Side Lower B-Pillar. An example VIN number would be similar to JTEDS41A102000011.

    Best For
    Family
    Long distance
    Warranty
    3Years
    or
    100,000km
    ANCAP Safety Rating
    Fuel Efficiency
    72 L655 km
    4 Door Wagon
    petrol
    3.5L
    FWD
    5 AT
    7
    4

    Dimensions

    1730mm
    1910mm
    4785mm

    The dimensions shown above are for the base model.

    Specifications

    TypeMulti Point Fuel Injection
    Size (cc)3456
    Size (L)-
    InductionV6
    CamshaftVARIABLE DOUBLE OVERHEAD CAM
    Valves/Ports per Cylinder24
    Power201kW
    Power RPM6200
    Torque337Nm
    Torque RPM4700
    Bore Stroke94x83
    Compression Ratio10.80

    Transmission5 Speed Automatic
    Final Gear Ratio3.478
    Suspension Frontanti roll bar, coil spring, gas damper, macpherson strut, lower control arm
    Suspension Rearanti roll bar, coil spring, gas damper, macpherson strut, lower control arm
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveFWD

    Fuel Combined (L/100km)11.0
    Fuel Urban (L/100km)-
    Fuel Extra Urban (L/100km)-
    Tank Size (L)72
    Fuel Typeunleaded petrol
    e10 Compatible-
    CO2 Combined259
    CO2 Urban-
    CO2 Extra Urban-

    Brake FrontDISC - VENTILATED
    Brake RearDISC
    Tyre Front245/55 R19
    Tyre Rear245/55 R19
    Front Rim Size7.5x19
    Rear Rim Size7.5x19

    Vehicle Height (mm)1730
    Vehicle Length (mm)4785
    Vehicle Width (mm)1910
    Ground Clearance (mm)206
    Wheelbase (mm)2790
    Turning Circle (m)11.8
    Unladen Weight (kg)1930
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)2630
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)2000
    Towing Capacity Unbraked (kg)700

    Compliance Plate LocationDriver Side Lower B-Pillar
    Country Of OriginJapan
    Number of Doors4
    Seats7
    Service Interval KMs10
    Service Interval Months6
    VIN LocationDriver Side Front Floor
    VIN NumberJTEDS41A102000011
    Warranty KMs100
    Warranty Months36
    Discontinued Date31/03/2013

    ANCAP Rating5
    Euro Air Pollution Standard-