1. Home
    2. Research
    3. Toyota
    4. HiAce
    5. 2020
    6. Price & Specs
    7. LWB TOW AND STOW PACK - ST/PNL
    Toyota HiAce

    2020 Toyota HiAce LWB TOW AND STOW PACK - ST/PNL Pricing and Spec

    From

    $36,600

    excl. on-roads

    Overview

    The 2020 Toyota HiAce LWB TOW AND STOW PACK - ST/PNL is a rear-wheel drive four-door van that was released to the Australian market on 32nd February 2019 classified as a GDH300R. The Toyota HiAce is regarded as a 4d van built in Japan with prices from a dealer as a used car starting at $36,600.

    The Toyota HiAce is a rear-wheel drive 4 door with 2 seats, powered by a 2.8L DIESEL TURBO 4 engine that has 130 kW of power (at 3400 rpm) and 450 Nm of torque (at 1600 rpm) via a Six-speed Automatic. Toyota claims the HiAce LWB TOW AND STOW PACK - ST/PNL uses 8.2L/100km of Diesel in the combined city and highway cycle while putting out 214g of CO2. It has a 70L fuel tank, meaning it should be able to travel 854km per full tank.

    The Toyota HiAce measures 1990mm (78.3 inches) in height, 5265mm (207.3 inches) in length, 1950mm (76.8 inches) in width with a 3210mm (126.4 inches) wheelbase that brings about a total of 2205kg (4861.2 lbs) of unladen weight. The HiAce LWB TOW AND STOW PACK - ST/PNL comes standard with 215/70 R16C 108/106T front tyres and 215/70 R16C 108/106T rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.

    The 2020 Toyota HiAce LWB TOW AND STOW PACK - ST/PNL has a 179mm ground clearance with a 1500kg braked and 400kg unbraked towing capacity. It has a final gear ratio of 3.727.

    The Toyota HiAce has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to JTFRA3AP501123456.

    Best For
    Work
    Transporting
    Warranty
    5Years
    or
    unlimited km
    ANCAP Safety Rating
    Fuel Efficiency
    70 L854 km
    4D VAN
    DIESEL
    2.8L
    REAR WHEEL DRIVE
    6 AT
    2
    4

    Dimensions

    1990mm
    1950mm
    5265mm

    The dimensions shown above are for the base model.

    Specifications

    TypeTURBO CDI
    Size (cc)2755
    Size (L)2.8L
    InductionDIESEL TURBO 4
    CamshaftDUAL OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power130kW
    Power RPM3400
    Torque450Nm
    Torque RPM1600
    Bore Stroke-
    Compression Ratio15.6

    Transmission6 SP AUTOMATIC
    Final Gear Ratio3.727
    Suspension Front-
    Suspension Rear-
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveREAR WHEEL DRIVE

    Fuel Combined (L/100km)8.2
    Fuel Urban (L/100km)9.2
    Fuel Extra Urban (L/100km)7.6
    Tank Size (L)70
    Fuel TypeDIESEL
    e10 Compatibleunknown
    CO2 Combined214
    CO2 Urban-
    CO2 Extra Urban-

    Brake FrontDISC - VENTILATED
    Brake RearDISC - VENTILATED
    Tyre Front215/70 R16C 108/106T
    Tyre Rear215/70 R16C 108/106T
    Front Rim Size7x16
    Rear Rim Size7x16

    Vehicle Height (mm)1990
    Vehicle Length (mm)5265
    Vehicle Width (mm)1950
    Ground Clearance (mm)179
    Wheelbase (mm)3210
    Turning Circle (m)11
    Unladen Weight (kg)2205
    Gross Combined Weight (kg)0
    Gross Vehicle Weight (kg)3300
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)1500
    Towing Capacity Unbraked (kg)400

    Compliance Plate LocationPass Side Lower B-Pillar
    Country Of OriginJAPAN
    Number of Doors4
    Seats2
    Service Interval KMs10
    Service Interval Months6
    VIN LocationDriver Side Front Floor
    VIN NumberJTFRA3AP501123456
    Warranty KMs-
    Warranty Months60
    Discontinued Date2020-05-31

    ANCAP Rating5
    Euro Air Pollution StandardEURO 5