The 2020 Toyota HiAce LWB STEEL PANEL is a rear-wheel drive four-door van that was released to the Australian market on 32nd February 2019
classified as a GDH300R. The Toyota HiAce is regarded as a 4d van built in Japan with prices from a dealer as a used car starting at $34,200.
The Toyota HiAce is a rear-wheel drive 4 door with 2 seats, powered by a 2.8L DIESEL TURBO 4 engine that has 130 kW of power (at 3400 rpm) and 450 Nm of torque (at 1600 rpm) via a Six-speed Automatic. Toyota claims the HiAce LWB STEEL PANEL uses 8.2L/100km of Diesel in the combined city and highway cycle while putting out 214g of CO2. It has a 70L fuel tank, meaning it should be able to travel 854km per full tank.
The Toyota HiAce measures 1990mm (78.3 inches) in height, 5265mm (207.3 inches) in length, 1950mm (76.8 inches) in width with a 3210mm (126.4 inches) wheelbase that brings about a total of 2205kg (4861.2 lbs) of unladen weight. The HiAce LWB STEEL PANEL comes standard with 215/70 R16C 108/106T front tyres and 215/70 R16C 108/106T rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2020 Toyota HiAce LWB STEEL PANEL has a 179mm ground clearance with a 1500kg braked and 400kg unbraked towing capacity. It has a final gear ratio of 3.727.
The Toyota HiAce has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to JTFRA3AP501123456.
