The 2012 Toyota Camry TOURING SE is a front-wheel drive four-door sedan that was released to the Australian market on 91st April 2010
classified as a ACV40R 09 UPGRADE. The Toyota Camry is regarded as a 4d sedan built in AUSTRALIA with prices from a dealer as a used car starting at $10,500.
The Toyota Camry is a front-wheel drive 4 door with 5 seats, powered by a 2.4L INLINE 4 engine that has 117 kW of power (at 5700 rpm) and 218 Nm of torque (at 4000 rpm) via a Five-speed Automatic. Toyota claims the Camry TOURING SE uses 8.8L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 233g of CO2. It has a 70L fuel tank, meaning it should be able to travel 795km per full tank.
The Toyota Camry measures 1480mm (58.3 inches) in height, 4815mm (189.6 inches) in length, 1820mm (71.7 inches) in width with a 2775mm (109.3 inches) wheelbase that brings about a total of 1480kg (3262.8 lbs) of unladen weight. The Camry TOURING SE comes standard with 215/55 R17 front tyres and 215/55 R17 rear tyres. It requires a service every 9 months or 15,000 km, whichever comes first. It has a 36 month, 100km warranty.
The 2012 Toyota Camry TOURING SE has a 129mm ground clearance with a 1200kg braked and 500kg unbraked towing capacity. It has a final gear ratio of 3.39.
The Toyota Camry has received a 4 star rating from ANCAP. The VIN number can be found on the Right Hand Front Floorpan and the compliance plate is located on the Upper Pass Side C-Pillar. An example VIN number would be similar to 6T153BK400X001167.
