1. Home
    2. Research
    3. Toyota
    4. Camry
    5. 2012
    6. Price & Specs
    7. ALTISE
    Toyota Camry

    2012 Toyota Camry Altise Pricing and Spec

    From

    $10,100

    excl. on-roads

    Overview

    The 2012 Toyota Camry ALTISE is a front wheel drive 4 Door Sedan that was released to the Australian market on 7th January 2009 classified as a ACV40R 09 UPGRADE. The Toyota Camry is regarded as a medium built in Australia with prices from a dealer as a used car starting at $10,100.

    The Toyota Camry is a front wheel drive 4 door with 5 seats, powered by a 2.4L Inline 4 Cylinder engine that has 117 kW of power (at 5700 rpm) and 218 Nm of torque (at 4000 rpm) via a 5 Speed Manual. Toyota claims the Camry ALTISE uses 8.9L/100km of unleaded petrol in the combined city and highway cycle while putting out 210g of CO2. It has a 70L fuel tank, meaning it should be able to travel 787km per full tank.

    The Toyota Camry measures 1480mm (58.3 inches) in height, 4815mm (189.6 inches) in length, 1820mm (71.7 inches) in width with a 2775mm (109.3 inches) wheelbase that brings about a total of 1480kg (3262.8 lbs) of unladen weight. The Camry ALTISE comes standard with 205/60 R16 front tyres and 205/60 R16 rear tyres. It requires a service every 9 months or 15,000 km, whichever comes first. It has a 36 month, 100km warranty.

    The 2012 Toyota Camry ALTISE has a 129mm ground clearance with a 1200kg braked and 500kg unbraked towing capacity.

    The Toyota Camry has received a 4 star rating from ANCAP. The VIN number can be found on the Right Hand Front Floorpan and the compliance plate is located on the Upper Pass Side C-Pillar. An example VIN number would be similar to 6T153BK400X001167.

    Best For
    Family
    Long distance
    Warranty
    3Years
    or
    100,000km
    ANCAP Safety Rating
    Fuel Efficiency
    70 L787 km
    4 Door Sedan
    petrol
    2.4L
    FWD
    5 MT
    5
    4

    Dimensions

    1480mm
    1820mm
    4815mm

    The dimensions shown above are for the base model.

    Specifications

    TypeMulti Point Fuel Injection
    Size (cc)2362
    Size (L)-
    InductionInline 4 Cylinder
    CamshaftVARIABLE DOUBLE OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power117kW
    Power RPM5700
    Torque218Nm
    Torque RPM4000
    Bore Stroke88.5x96
    Compression Ratio9.60

    Transmission5 Speed Manual
    Final Gear Ratio0.000
    Suspension Frontanti roll bar, coil spring, macpherson strut, hydraulic double acting shock absorber
    Suspension Rearanti roll bar, coil spring, hydraulic double acting shock absorber, dual link
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveFWD

    Fuel Combined (L/100km)8.9
    Fuel Urban (L/100km)12.0
    Fuel Extra Urban (L/100km)7.2
    Tank Size (L)70
    Fuel Typeunleaded petrol
    e10 Compatible-
    CO2 Combined210
    CO2 Urban280
    CO2 Extra Urban169

    Brake FrontDISC - VENTILATED
    Brake RearDISC
    Tyre Front205/60 R16
    Tyre Rear205/60 R16
    Front Rim Size6.5x16
    Rear Rim Size6.5x16

    Vehicle Height (mm)1480
    Vehicle Length (mm)4815
    Vehicle Width (mm)1820
    Ground Clearance (mm)129
    Wheelbase (mm)2775
    Turning Circle (m)11.8
    Unladen Weight (kg)1480
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)-
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)1200
    Towing Capacity Unbraked (kg)500

    Compliance Plate LocationUpper Pass Side C-Pillar
    Country Of OriginAustralia
    Number of Doors4
    Seats5
    Service Interval KMs15
    Service Interval Months9
    VIN LocationRight Hand Front Floorpan
    VIN Number6T153BK400X001167
    Warranty KMs100
    Warranty Months36
    Discontinued Date31/01/2012

    ANCAP Rating4
    Euro Air Pollution StandardEURO 4