1. Home
    2. Research
    3. Toyota
    4. C-HR
    5. 2018
    6. Price & Specs
    7. (2WD)
    Toyota C-HR

    2018 Toyota C-HR (2wd) Pricing and Spec

    From

    $19,600

    excl. on-roads

    Overview

    The 2018 Toyota C-hr (2WD) is a front wheel drive 4 Door Wagon that was released to the Australian market on 11th January 2017 classified as a NGX10R UPDATE. The Toyota C-hr is regarded as a SUV small built in Japan with prices from a dealer as a used car starting at $19,600.

    The Toyota C-hr is a front wheel drive 4 door with 5 seats, powered by a 1.2L Turbo 4 Cylinder engine that has 85 kW of power (at 5200 rpm) and 185 Nm of torque (at 1500 rpm) via a 6 Speed Manual. Toyota claims the C-HR (2WD) uses 5.4L/100km of premium unleaded petrol in the combined city and highway cycle while putting out 141g of CO2. It has a 50L fuel tank, meaning it should be able to travel 926km per full tank.

    The Toyota C-hr measures 1565mm (61.6 inches) in height, 4360mm (171.7 inches) in length, 1795mm (70.7 inches) in width with a 2640mm (103.9 inches) wheelbase that brings about a total of 1425kg (3141.6 lbs) of unladen weight. The C-HR (2WD) comes standard with 215/60 R17 front tyres and 215/60 R17 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, 100km warranty.

    The 2018 Toyota C-hr (2WD) has a 154mm ground clearance with a 1100kg braked and 720kg unbraked towing capacity. It has a final gear ratio of 4.538.

    The Toyota C-hr has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Upper Pass Side C-Pillar. An example VIN number would be similar to JTNKY3BX391234567.

    Best For
    Family
    City driving
    Warranty
    3Years
    or
    100,000km
    ANCAP Safety Rating
    Fuel Efficiency
    50 L926 km
    4 Door Wagon
    petrol
    1.2L
    FWD
    6 MT
    5
    4

    Dimensions

    1565mm
    1795mm
    4360mm

    The dimensions shown above are for the base model.

    Specifications

    TypeTurbo Direct Fuel Injection
    Size (cc)1197
    Size (L)-
    InductionTurbo 4 Cylinder
    CamshaftDUAL OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power85kW
    Power RPM5200
    Torque185Nm
    Torque RPM1500
    Bore Stroke71.5x74.5
    Compression Ratio10.00

    Transmission6 Speed Manual
    Final Gear Ratio4.538
    Suspension Frontmacpherson strut, independent, stabiliser bar
    Suspension Rearcoil spring, double wishbone, stabiliser bar
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveFWD

    Fuel Combined (L/100km)5.4
    Fuel Urban (L/100km)5.4
    Fuel Extra Urban (L/100km)7.7
    Tank Size (L)50
    Fuel Typepremium unleaded petrol
    e10 Compatible-
    CO2 Combined141
    CO2 Urban176
    CO2 Extra Urban122

    Brake FrontDISC - VENTILATED
    Brake RearDISC
    Tyre Front215/60 R17
    Tyre Rear215/60 R17
    Front Rim Size6.5Jx17
    Rear Rim Size6.5Jx17

    Vehicle Height (mm)1565
    Vehicle Length (mm)4360
    Vehicle Width (mm)1795
    Ground Clearance (mm)154
    Wheelbase (mm)2640
    Turning Circle (m)10.4
    Unladen Weight (kg)1425
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)1845
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)1100
    Towing Capacity Unbraked (kg)720

    Compliance Plate LocationUpper Pass Side C-Pillar
    Country Of OriginJapan
    Number of Doors4
    Seats5
    Service Interval KMs15
    Service Interval Months12
    VIN LocationDriver Side Front Floor
    VIN NumberJTNKY3BX391234567
    Warranty KMs100
    Warranty Months36
    Discontinued Date30/09/2019

    ANCAP Rating5
    Euro Air Pollution StandardEURO 6