The 2020 Skoda Kamiq 110TSI MONTE CARLO is a front-wheel drive four-door wagon that was released to the Australian market on 245th September 2020
classified as a MY21. The Skoda Kamiq is regarded as a 4d wagon built in Czech Republic with prices from a dealer as a used car starting at $27,600.
The Skoda Kamiq is a front-wheel drive 4 door with 5 seats, powered by a 1.5L TURBO 4 engine that has 110 kW of power (at 6000 rpm) and 250 Nm of torque (at 1500 rpm) via a Seven-speed Auto Direct Shift. Skoda claims the Kamiq 110TSI MONTE CARLO uses 5.6L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 128g of CO2. It has a 50L fuel tank, meaning it should be able to travel 893km per full tank.
The Skoda Kamiq measures 1531mm (60.3 inches) in height, 4241mm (167.0 inches) in length, 1793mm (70.6 inches) in width with a 2651mm (104.4 inches) wheelbase that brings about a total of 1237kg (2727.1 lbs) of unladen weight. The Kamiq 110TSI MONTE CARLO comes standard with 215/45 R18 front tyres and 215/45 R18 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2020 Skoda Kamiq 110TSI MONTE CARLO has a 188mm ground clearance with a 1250kg braked and 630kg unbraked towing capacity.
The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Driver Side Lower B-Pillar. An example VIN number would be similar to TMBHK@NW*L#123456.
