1. Home
    2. Research
    3. Porsche
    4. 911
    5. 2020
    6. Price & Specs
    7. TARGA 4S HERITAGE DESIGN EDTN
    Porsche 911

    2020 Porsche 911 TARGA 4S HERITAGE DESIGN EDTN Pricing and Spec

    From

    $311,300

    excl. on-roads

    Overview

    The 2020 Porsche 911 TARGA 4S HERITAGE DESIGN EDTN is an all-wheel drive 2D TARGA that was released to the Australian market on 183rd July 2020 classified as a 992 MY21. The Porsche 911 is regarded as a 2d targa built in Germany with prices from a dealer as a used car starting at $311,300.

    The Porsche 911 is an all-wheel drive 2 door with 4 seats, powered by a 3.0L FLAT 6 engine that has 331 kW of power (at 6500 rpm) and 530 Nm of torque (at 2300 rpm) via a 7 SP MANUAL. Porsche claims the 911 TARGA 4S HERITAGE DESIGN EDTN uses 9.7L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 222g of CO2. It has a 67L fuel tank, meaning it should be able to travel 691km per full tank.

    The Porsche 911 measures 1301mm (51.2 inches) in height, 4519mm (177.9 inches) in length, 1852mm (72.9 inches) in width with a 2450mm (96.5 inches) wheelbase that brings about a total of 1640kg (3615.6 lbs) of unladen weight. The 911 TARGA 4S HERITAGE DESIGN EDTN comes standard with 245/35 ZR20 front tyres and 305/30 ZR21 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.

    The 2020 Porsche 911 TARGA 4S HERITAGE DESIGN EDTN has a 0mm ground clearance It has a final gear ratio of 3.56.

    The VIN number can be found on the Under Driver Seat On Floor and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WP0ZZZ99ZLS201001.

    Best For
    Luxury
    Fun
    Warranty
    3Years
    or
    unlimited km
    Fuel Efficiency
    67 L691 km
    2D TARGA
    petrol
    3.0L
    ALL WHEEL DRIVE
    7 MT
    4
    2

    Dimensions

    1301mm
    1852mm
    4519mm

    The dimensions shown above are for the base model.

    Specifications

    TypeBI TURBO DIR F/INJ
    Size (cc)2981
    Size (L)3.0L
    InductionFLAT 6
    CamshaftVARIABLE DOUBLE OVERHEAD CAM
    Valves/Ports per Cylinder24
    Power331kW
    Power RPM6500
    Torque530Nm
    Torque RPM2300
    Bore Stroke-
    Compression Ratio10.2

    Transmission7 SP MANUAL
    Final Gear Ratio3.56
    Suspension Front-
    Suspension Rear-
    Steering MechanismELECTROMECHANICAL POWER STEERING
    DriveALL WHEEL DRIVE

    Fuel Combined (L/100km)9.7
    Fuel Urban (L/100km)13.4
    Fuel Extra Urban (L/100km)7.6
    Tank Size (L)67
    Fuel TypePREMIUM UNLEADED PETROL
    e10 Compatibleunknown
    CO2 Combined222
    CO2 Urban305
    CO2 Extra Urban173

    Brake FrontDISC - VENTILATED
    Brake RearDISC - VENTILATED
    Tyre Front245/35 ZR20
    Tyre Rear305/30 ZR21
    Front Rim Size8.5Jx20 ET53
    Rear Rim Size11.5Jx21 ET67

    Vehicle Height (mm)1301
    Vehicle Length (mm)4519
    Vehicle Width (mm)1852
    Ground Clearance (mm)0
    Wheelbase (mm)2450
    Turning Circle (m)11.2
    Unladen Weight (kg)1640
    Gross Combined Weight (kg)0
    Gross Vehicle Weight (kg)2055
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)0
    Towing Capacity Unbraked (kg)0

    Compliance Plate LocationPass Side Lower A-Pillar
    Country Of OriginGERMANY
    Number of Doors2
    Seats4
    Service Interval KMs15
    Service Interval Months12
    VIN LocationUnder Driver Seat On Floor
    VIN NumberWP0ZZZ99ZLS201001
    Warranty KMs-
    Warranty Months36
    Discontinued Date2021-06-30

    ANCAP Rating-
    Euro Air Pollution StandardEURO 5