2021 Peugeot Expert 150 Hdi Standard Pricing and Spec
From
$25,800
excl. on-roads
Overview
The 2021 Peugeot Expert 150 HDI STANDARD is a front wheel drive 2 Door Van that was released to the Australian market on 2nd January 2020 classified as a K0 MY20. The Peugeot Expert is regarded as a vans/cab chassis 2.5-3.5t built in France with prices from a dealer as a used car starting at $25,800.
The Peugeot Expert is a front wheel drive 2 door with 3 seats, powered by a 2.0L Diesel Turbo 4 Cylinder engine that has 110 kW of power (at 4000 rpm) and 370 Nm of torque (at 2000 rpm) via a 6 Speed Electronic Automatic. Peugeot claims the Expert 150 HDI STANDARD uses 6.4L/100km of diesel in the combined city and highway cycle while putting out 166g of CO2. It has a 69L fuel tank, meaning it should be able to travel 1078km per full tank.
The Peugeot Expert measures 1930mm (76.0 inches) in height, 4959mm (195.2 inches) in length, 2010mm (79.1 inches) in width with a 3725mm (146.7 inches) wheelbase that brings about a total of 1907kg (4204.2 lbs) of unladen weight. The Expert 150 HDI STANDARD comes standard with 216/65 R1C 106T front tyres and 216/65 R1C 106T rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, 200km warranty.
The 2021 Peugeot Expert 150 HDI STANDARD has a 188mm ground clearance with a 1500kg braked and 750kg unbraked towing capacity.
The VIN number can be found on the Centre Eng Bay Scuttle and the compliance plate is located on the Lower Driver Side B-Pillar. An example VIN number would be similar to VF3VFAHXN@Z123456.
Dimensions
The dimensions shown above are for the base model.
Specifications
| Type | Turbo Common Rail Diesel Injection |
|---|---|
| Size (cc) | 1997 |
| Size (L) | - |
| Induction | Diesel Turbo 4 Cylinder |
| Camshaft | NOT PROVIDED |
| Valves/Ports per Cylinder | - |
| Power | 110kW |
| Power RPM | 4000 |
| Torque | 370Nm |
| Torque RPM | 2000 |
| Bore Stroke | 85x88 |
| Compression Ratio | - |
| Transmission | 6 Speed Electronic Automatic |
|---|---|
| Final Gear Ratio | 0.000 |
| Suspension Front | anti roll bar, pseudo macpherson stru, reinforced front axle |
| Suspension Rear | oblique wishbone trailing arm |
| Steering Mechanism | RACK & PINION - POWER ASSISTED |
| Drive | FWD |
| Fuel Combined (L/100km) | 6.4 |
|---|---|
| Fuel Urban (L/100km) | 7.3 |
| Fuel Extra Urban (L/100km) | 5.8 |
| Tank Size (L) | 69 |
| Fuel Type | diesel |
| e10 Compatible | - |
| CO2 Combined | 166 |
| CO2 Urban | 192 |
| CO2 Extra Urban | 152 |
| Brake Front | DISC - VENTILATED |
|---|---|
| Brake Rear | DISC |
| Tyre Front | 216/65 R1C 106T |
| Tyre Rear | 216/65 R1C 106T |
| Front Rim Size | 6x16 |
| Rear Rim Size | 6x16 |
| Vehicle Height (mm) | 1930 |
|---|---|
| Vehicle Length (mm) | 4959 |
| Vehicle Width (mm) | 2010 |
| Ground Clearance (mm) | 188 |
| Wheelbase (mm) | 3725 |
| Turning Circle (m) | 12.4 |
| Unladen Weight (kg) | 1907 |
| Gross Combined Weight (kg) | - |
| Gross Vehicle Weight (kg) | 2730 |
| Track Front | - |
| Track Rear | - |
| Towing Capacity Brake (kg) | 1500 |
| Towing Capacity Unbraked (kg) | 750 |
| Compliance Plate Location | Lower Driver Side B-Pillar |
|---|---|
| Country Of Origin | France |
| Number of Doors | 2 |
| Seats | 3 |
| Service Interval KMs | 15 |
| Service Interval Months | 12 |
| VIN Location | Centre Eng Bay Scuttle |
| VIN Number | VF3VFAHXN@Z123456 |
| Warranty KMs | 200 |
| Warranty Months | 60 |
| Discontinued Date | - |
| ANCAP Rating | - |
|---|---|
| Euro Air Pollution Standard | EURO 5 |