The 2020 Peugeot Expert 180 HDI LONG is a front-wheel drive two-door van that was released to the Australian market on 32nd February 2020
classified as a K0 MY20. The Peugeot Expert is regarded as a 2d van built in France with prices from a dealer as a used car starting at $25,500.
The Peugeot Expert is a front-wheel drive 2 door with 3 seats, powered by a 2.0L DIESEL TURBO 4 engine that has 130 kW of power (at 4000 rpm) and 400 Nm of torque (at 2000 rpm) via a Six-speed Electronic Automatic. Peugeot claims the Expert 180 HDI LONG uses 6.2L/100km of Diesel in the combined city and highway cycle while putting out 163g of CO2. It has a 69L fuel tank, meaning it should be able to travel 1113km per full tank.
The Peugeot Expert measures 1935mm (76.2 inches) in height, 5309mm (209.0 inches) in length, 2010mm (79.1 inches) in width with a 3725mm (146.7 inches) wheelbase that brings about a total of 1958kg (4316.6 lbs) of unladen weight. The Expert 180 HDI LONG comes standard with 216/65 R1C 106T front tyres and 216/65 R1C 106T rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, 200km warranty.
The 2020 Peugeot Expert 180 HDI LONG has a 188mm ground clearance with a 2200kg braked and 750kg unbraked towing capacity.
The VIN number can be found on the Centre Eng Bay Scuttle and the compliance plate is located on the Lower Driver Side B-Pillar. An example VIN number would be similar to VF3VFEHZP@Z123456.
