The 2018 Peugeot 308 ALLURE TOURING is a front-wheel drive four-door wagon that was released to the Australian market on 1st January 2018
classified as a T9 MY18 UPDATE. The Peugeot 308 is regarded as a 4d wagon built in France with prices from a dealer as a used car starting at $24,600.
The Peugeot 308 is a front-wheel drive 4 door with 5 seats, powered by a 2.0L DIESEL TURBO 4 engine that has 110 kW of power (at 3750 rpm) and 370 Nm of torque (at 2000 rpm) via a Six-speed Automatic. Peugeot claims the 308 ALLURE TOURING uses 4.2L/100km of Diesel in the combined city and highway cycle while putting out 111g of CO2. It has a 53L fuel tank, meaning it should be able to travel 1262km per full tank.
The Peugeot 308 measures 1472mm (58.0 inches) in height, 4585mm (180.5 inches) in length, 1863mm (73.3 inches) in width with a 2730mm (107.5 inches) wheelbase that brings about a total of 1280kg (2821.9 lbs) of unladen weight. The 308 ALLURE TOURING comes standard with 225/45 R17 front tyres and 225/45 R17 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2018 Peugeot 308 ALLURE TOURING has a 0mm ground clearance with a 1500kg braked and 610kg unbraked towing capacity.
The VIN number can be found on the Driver Side Eng Scuttle and the compliance plate is located on the Driver Side Lower B-Pillar. An example VIN number would be similar to VF3LHAHXW@S123456.