The 2018 Mini 3D Hatch COOPER S is a front-wheel drive three-door hatchback that was released to the Australian market on 152nd June 2017
classified as a F56 MY17. The Mini 3D Hatch is regarded as a 3d hatchback built in United Kingdom with prices from a dealer as a used car starting at $25,800.
The Mini 3D Hatch is a front-wheel drive 3 door with 4 seats, powered by a 2.0L TURBO 4 engine that has 141 kW of power (at 4700 rpm) and 280 Nm of torque (at 1250 rpm) via a Six-speed Automatic. Mini claims the 3D Hatch COOPER S uses 5.5L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 127g of CO2. It has a 44L fuel tank, meaning it should be able to travel 800km per full tank.
The Mini 3D Hatch measures 1414mm (55.7 inches) in height, 3821mm (150.4 inches) in length, 1727mm (68.0 inches) in width with a 2495mm (98.2 inches) wheelbase that brings about a total of 1175kg (2590.4 lbs) of unladen weight. The 3D Hatch COOPER S comes standard with 205/45 R17 front tyres and 205/45 R17 rear tyres. It requires a service every 24 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2018 Mini 3D Hatch COOPER S has a 124mm ground clearance It has a final gear ratio of 3.502.
The Mini 3D Hatch has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to WMWXM720%0T000011.