2019 Mini Convertible JOHN COOPER WORKS Pricing and Spec

The 2019 Mini Convertible JOHN COOPER WORKS is a front-wheel drive two-door convertible that was released to the Australian market on 182nd July 2019 classified as a F57. The Mini Convertible is regarded as a 2d convertible built in United Kingdom with prices from a dealer as a used car starting at $42,000.

The Mini Convertible is a front-wheel drive 2 door with 4 seats, powered by a 2.0L TURBO 4 engine that has 170 kW of power (at 5200 rpm) and 320 Nm of torque (at 1450 rpm) via a Six-speed Manual. Mini claims the Convertible JOHN COOPER WORKS uses 7L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 159g of CO₂. It has a 44L fuel tank, meaning it should be able to travel 629km per full tank.

The Mini Convertible measures 1415mm (55.7 inches) in height, 3874mm (152.5 inches) in length, 1727mm (68.0 inches) in width with a 2495mm (98.2 inches) wheelbase that brings about a total of 1395kg (3075.4 lbs) of unladen weight. The Convertible JOHN COOPER WORKS comes standard with 205/40 R18 front tyres and 205/40 R18 rear tyres. It requires a service every 24 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.

The 2019 Mini Convertible JOHN COOPER WORKS has a 115mm ground clearance It has a final gear ratio of 2.955.

The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to WMWWJ920%03E79382.