1. Home
    2. Research
    3. MG
    4. ZS
    5. 2020
    6. Price & Specs
    7. ESSENCE
    MG ZS

    2020 MG ZS Essence Pricing and Spec

    From

    $17,400

    excl. on-roads

    Overview

    The 2020 Mg Zs ESSENCE is a front wheel drive 4 Door Wagon that was released to the Australian market on 9th January 2020 classified as a AZS1 MY21. The Mg Zs is regarded as a SUV small built in China with prices from a dealer as a used car starting at $17,400.

    The Mg Zs is a front wheel drive 4 door with 5 seats, powered by a 1.0L Turbo 3 Cylinder engine that has 82 kW of power (at 5200 rpm) and 160 Nm of torque (at 1800 rpm) via a 6 Speed Automatic. MG claims the ZS ESSENCE uses 6.7L/100km of unleaded petrol in the combined city and highway cycle while putting out 157g of CO2. It has a 48L fuel tank, meaning it should be able to travel 716km per full tank.

    The Mg Zs measures 1644mm (64.7 inches) in height, 4314mm (169.8 inches) in length, 1809mm (71.2 inches) in width with a 2585mm (101.8 inches) wheelbase that brings about a total of 1245kg (2744.8 lbs) of unladen weight. The ZS ESSENCE comes standard with 215/50 R17 front tyres and 215/50 R17 rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 84 month, unlimited kilometre warranty.

    The 2020 Mg Zs ESSENCE has a 164mm ground clearance

    The Mg Zs has received a 5 star rating from ANCAP. The VIN number can be found on the Under Driver Seat On Floor and the compliance plate is located on the Lower of Driver Side C-Pillar. An example VIN number would be similar to LSJW74C9*HS123456.

    Best For
    Family
    City driving
    Warranty
    7Years
    or
    unlimited km
    ANCAP Safety Rating
    Fuel Efficiency
    48 L716 km
    4 Door Wagon
    petrol
    1.0L
    FWD
    6 AT
    5
    4

    Pros

    • Bargain entry price
    • Seven-year warranty
    • Handsome design

    Cons

    • Short on active safety
    • Uninspiring drivetrain
    • Cabin built to a price

    Dimensions

    1644mm
    1809mm
    4314mm

    The dimensions shown above are for the base model.

    Specifications

    TypeTurbo Direct Fuel Injection
    Size (cc)999
    Size (L)-
    InductionTurbo 3 Cylinder
    CamshaftNOT PROVIDED
    Valves/Ports per Cylinder12
    Power82kW
    Power RPM5200
    Torque160Nm
    Torque RPM1800
    Bore Stroke-
    Compression Ratio-

    Transmission6 Speed Automatic
    Final Gear Ratio0.000
    Suspension Frontcoil spring, macpherson strut, height corrector
    Suspension Rearcoil spring, height corrector, torsion beam
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveFWD

    Fuel Combined (L/100km)6.7
    Fuel Urban (L/100km)8.4
    Fuel Extra Urban (L/100km)5.7
    Tank Size (L)48
    Fuel Typeunleaded petrol
    e10 Compatibleyes
    CO2 Combined157
    CO2 Urban-
    CO2 Extra Urban-

    Brake FrontDISC - VENTILATED
    Brake RearDISC
    Tyre Front215/50 R17
    Tyre Rear215/50 R17
    Front Rim Size7x17
    Rear Rim Size7x17

    Vehicle Height (mm)1644
    Vehicle Length (mm)4314
    Vehicle Width (mm)1809
    Ground Clearance (mm)164
    Wheelbase (mm)2585
    Turning Circle (m)0.0
    Unladen Weight (kg)1245
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)-
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)-
    Towing Capacity Unbraked (kg)500

    Compliance Plate LocationLower of Driver Side C-Pillar
    Country Of OriginChina
    Number of Doors4
    Seats5
    Service Interval KMs10
    Service Interval Months6
    VIN LocationUnder Driver Seat On Floor
    VIN NumberLSJW74C9*HS123456
    Warranty KMs999
    Warranty Months84
    Discontinued Date-

    ANCAP Rating5
    Euro Air Pollution StandardEURO 5