The 2020 MG3 CORE (WITH NAVIGATION) is a front-wheel drive five-door hatchback that was released to the Australian market on 335th December 2019
classified as a MY20. The MG3 is regarded as a 5d hatchback built in China with prices from a dealer as a used car starting at $12,800.
The MG3 is a front-wheel drive 5 door with 5 seats, powered by a 1.5L INLINE 4 engine that has 82 kW of power (at 6000 rpm) and 150 Nm of torque (at 4500 rpm) via a Four-speed Automatic. MG claims the MG3 CORE (WITH NAVIGATION) uses 6.7L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 159g of CO2. It has a 45L fuel tank, meaning it should be able to travel 672km per full tank.
The MG3 measures 1504mm (59.2 inches) in height, 4055mm (159.6 inches) in length, 1729mm (68.1 inches) in width with a 2520mm (99.2 inches) wheelbase that brings about a total of 1170kg (2579.4 lbs) of unladen weight. The MG3 CORE (WITH NAVIGATION) comes standard with 185/65 R15 front tyres and 185/65 R15 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 84 month, unlimitedkm warranty.
The 2020 MG3 CORE (WITH NAVIGATION) has a 132mm ground clearance with a 200kg braked and 200kg unbraked towing capacity.
The VIN number can be found on the Driver Side Eng Scuttle and the compliance plate is located on the Lower of Driver Side C-Pillar. An example VIN number would be similar to LSJZ14U91JS123456.