2020 Mercedes-Benz Vito 111CDI LWB Pricing and Spec
From
$25,000
excl. on-roads
Overview
The 2020 Mercedes-Benz Vito 111CDI LWB is a front-wheel drive five-door van that was released to the Australian market on 182nd July 2019 classified as a 447 MY20. The Mercedes-Benz Vito is regarded as a 5d van built in Germany with prices from a dealer as a used car starting at $25,000.
The Mercedes-Benz Vito is a front-wheel drive 5 door with 2 seats, powered by a 1.6L DIESEL TURBO 4 engine that has 84 kW of power (at 3800 rpm) and 270 Nm of torque (at 1500 rpm) via a Six-speed Manual. Mercedes-Benz claims the Vito 111CDI LWB uses 6.3L/100km of Diesel in the combined city and highway cycle while putting out 166g of CO2. It has a 70L fuel tank, meaning it should be able to travel 1111km per full tank.
The Mercedes-Benz Vito measures 1910mm (75.2 inches) in height, 5370mm (211.4 inches) in length, 1928mm (75.9 inches) in width with a 3430mm (135.0 inches) wheelbase that brings about a total of 1815kg (4001.4 lbs) of unladen weight. The Vito 111CDI LWB comes standard with 205/65 R16 front tyres and 205/65 R16 rear tyres. It requires a service every 12 months or 25,000 km, whichever comes first. It has a 60 month, 250km warranty.
The 2020 Mercedes-Benz Vito 111CDI LWB has a 110mm ground clearance with a 2500kg braked and 750kg unbraked towing capacity.
The VIN number can be found on the RHS - Front Suspension Tower and the compliance plate is located on the Lower Pass Side B-Pillar. An example VIN number would be similar to WDF44760523000001.
Dimensions
The dimensions shown above are for the base model.
Specifications
| Type | TURBO CDI |
|---|---|
| Size (cc) | 1598 |
| Size (L) | 1.6L |
| Induction | DIESEL TURBO 4 |
| Camshaft | DUAL OVERHEAD CAM |
| Valves/Ports per Cylinder | 16 |
| Power | 84kW |
| Power RPM | 3800 |
| Torque | 270Nm |
| Torque RPM | 1500 |
| Bore Stroke | - |
| Compression Ratio | 15.4 |
| Transmission | 6 SP MANUAL |
|---|---|
| Final Gear Ratio | 0 |
| Suspension Front | - |
| Suspension Rear | - |
| Steering Mechanism | RACK & PINION - POWER ASSISTED |
| Drive | FRONT WHEEL DRIVE |
| Fuel Combined (L/100km) | 6.3 |
|---|---|
| Fuel Urban (L/100km) | 7.8 |
| Fuel Extra Urban (L/100km) | 5.4 |
| Tank Size (L) | 70 |
| Fuel Type | DIESEL |
| e10 Compatible | unknown |
| CO2 Combined | 166 |
| CO2 Urban | 205 |
| CO2 Extra Urban | 143 |
| Brake Front | DISC - VENTILATED |
|---|---|
| Brake Rear | DISC |
| Tyre Front | 205/65 R16 |
| Tyre Rear | 205/65 R16 |
| Front Rim Size | 6.5x16 |
| Rear Rim Size | 6.5x16 |
| Vehicle Height (mm) | 1910 |
|---|---|
| Vehicle Length (mm) | 5370 |
| Vehicle Width (mm) | 1928 |
| Ground Clearance (mm) | 110 |
| Wheelbase (mm) | 3430 |
| Turning Circle (m) | 13.7 |
| Unladen Weight (kg) | 1815 |
| Gross Combined Weight (kg) | 5550 |
| Gross Vehicle Weight (kg) | 3050 |
| Track Front | - |
| Track Rear | - |
| Towing Capacity Brake (kg) | 2500 |
| Towing Capacity Unbraked (kg) | 750 |
| Compliance Plate Location | Lower Pass Side B-Pillar |
|---|---|
| Country Of Origin | GERMANY |
| Number of Doors | 5 |
| Seats | 2 |
| Service Interval KMs | 25 |
| Service Interval Months | 12 |
| VIN Location | RHS - Front Suspension Tower |
| VIN Number | WDF44760523000001 |
| Warranty KMs | 250 |
| Warranty Months | 60 |
| Discontinued Date | 2020-10-31 |
| ANCAP Rating | - |
|---|---|
| Euro Air Pollution Standard | EURO 5 |