The 2013 Mercedes-Benz Vito 110CDI is a rear-wheel drive four-door van that was released to the Australian market on 336th December 2012
classified as a MY13. The Mercedes-Benz Vito is regarded as a 4d van built in Spain with prices from a dealer as a used car starting at $16,200.
The Mercedes-Benz Vito is a rear-wheel drive 4 door with 2 seats, powered by a 2.1L DIESEL TURBO 4 engine that has 70 kW of power (at 3800 rpm) and 250 Nm of torque (at 1200 rpm) via a Six-speed Manual. Mercedes-Benz claims the Vito 110CDI uses 7.7L/100km of Diesel in the combined city and highway cycle while putting out 203g of CO2. It has a 75L fuel tank, meaning it should be able to travel 974km per full tank.
The Mercedes-Benz Vito measures 1901mm (74.8 inches) in height, 4748mm (186.9 inches) in length, 1901mm (74.8 inches) in width with a 3200mm (126.0 inches) wheelbase that brings about a total of 1660kg (3659.7 lbs) of unladen weight. The Vito 110CDI comes standard with 205/65 R16 front tyres and 205/65 R16 rear tyres. It requires a service every 12 months or 25,000 km, whichever comes first. It has a 36 month, 200km warranty.
The 2013 Mercedes-Benz Vito 110CDI has a 146mm ground clearance with a 2000kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 4.091.
The Mercedes-Benz Vito has received a 4 star rating from ANCAP. The VIN number can be found on the Centre Top Scuttle and the compliance plate is located on the Pass Side Front Floor. An example VIN number would be similar to WDF63960123000001.
