The 2021 Mazda 6 ATENZA is a front-wheel drive four-door sedan that was released to the Australian market on 336th December 2020
classified as a 600S. The Mazda 6 is regarded as a 4d sedan built in Japan with prices from a dealer as a used car starting at $37,400.
The Mazda 6 is a front-wheel drive 4 door with 5 seats, powered by a 2.5L TURBO 4 engine that has 170 kW of power (at 5000 rpm) and 420 Nm of torque (at 2000 rpm) via a Six-speed Automatic. Mazda claims the Mazda 6 ATENZA uses 7.6L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 178g of CO2. It has a 62L fuel tank, meaning it should be able to travel 816km per full tank.
The Mazda 6 measures 1450mm (57.1 inches) in height, 4865mm (191.5 inches) in length, 1840mm (72.4 inches) in width with a 2830mm (111.4 inches) wheelbase that brings about a total of 1621kg (3573.7 lbs) of unladen weight. The Mazda 6 ATENZA comes standard with 225/45 R19 92W front tyres and 225/45 R19 92W rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2021 Mazda 6 ATENZA has a 165mm ground clearance with a 1600kg braked and 550kg unbraked towing capacity. It has a final gear ratio of 4.09.
The Mazda 6 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0GL103300123456.
