The 2020 Mazda 6 ATENZA 100TH ANNIVERSARY is a front-wheel drive four-door wagon that was released to the Australian market on 183rd July 2020
classified as a GL. The Mazda 6 is regarded as a 4d wagon built in Japan with prices from a dealer as a used car starting at $38,600.
The Mazda 6 is a front-wheel drive 4 door with 5 seats, powered by a 2.5L TURBO 4 engine that has 170 kW of power (at 5000 rpm) and 420 Nm of torque (at 2000 rpm) via a Six-speed Automatic. Mazda claims the Mazda 6 ATENZA 100TH ANNIVERSARY uses 7.6L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 178g of CO2. It has a 62L fuel tank, meaning it should be able to travel 816km per full tank.
The Mazda 6 measures 1480mm (58.3 inches) in height, 4800mm (189.0 inches) in length, 1840mm (72.4 inches) in width with a 2750mm (108.3 inches) wheelbase that brings about a total of 1526kg (3364.3 lbs) of unladen weight. The Mazda 6 ATENZA 100TH ANNIVERSARY comes standard with 225/45 R19 front tyres and 225/45 R19 rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2020 Mazda 6 ATENZA 100TH ANNIVERSARY has a 165mm ground clearance with a 1500kg braked and 550kg unbraked towing capacity. It has a final gear ratio of 4.09.
The Mazda 6 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0GL103300123456.
