The 2020 Mazda 3 Mazda
X20 ASTINA M HYBRID is a front-wheel drive four-door sedan that was released to the Australian market on 122nd May 2020
classified as a 300N. The Mazda Mazda 3 is regarded as a 4d sedan built in Japan with prices from a dealer as a used car starting at $33,800.
The Mazda Mazda 3 is a front-wheel drive 4 door with 5 seats, powered by a 2.0L INLINE 4 engine that has 132 kW of power (at 6000 rpm) and 224 Nm of torque (at 3000 rpm) via a Six-speed Automatic. Mazda claims the Mazda 3 X20 ASTINA M HYBRID uses 5.5L/100km of Unleaded Petrol-Electric Hybrid in the combined city and highway cycle while putting out 132g of CO2. It has a 51L fuel tank, meaning it should be able to travel 927km per full tank.
The Mazda Mazda 3 measures 1440mm (56.7 inches) in height, 4660mm (183.5 inches) in length, 1795mm (70.7 inches) in width with a 2725mm (107.3 inches) wheelbase that brings about a total of 1388kg (3060.0 lbs) of unladen weight. The Mazda 3 X20 ASTINA M HYBRID comes standard with 215/45 R18 89W front tyres and 215/45 R18 89W rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2020 Mazda Mazda 3 X20 ASTINA M HYBRID has a 150mm ground clearance with a 1200kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 4.367.
The Mazda Mazda 3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0BP2SHA01123456.
