The 2020 Mazda 3 Mazda
G20 TOURING is a front-wheel drive five-door hatchback that was released to the Australian market on 32nd February 2019
classified as a BP. The Mazda Mazda 3 is regarded as a 5d hatchback built in Japan with prices from a dealer as a used car starting at $25,100.
The Mazda Mazda 3 is a front-wheel drive 5 door with 5 seats, powered by a 2.0L INLINE 4 engine that has 114 kW of power (at 6000 rpm) and 200 Nm of torque (at 4000 rpm) via a Six-speed Manual. Mazda claims the Mazda 3 G20 TOURING uses 6.2L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 151g of CO2. It has a 51L fuel tank, meaning it should be able to travel 823km per full tank.
The Mazda Mazda 3 measures 1440mm (56.7 inches) in height, 1435mm (56.5 inches) in length, 1795mm (70.7 inches) in width with a 2725mm (107.3 inches) wheelbase that brings about a total of 1317kg (2903.5 lbs) of unladen weight. The Mazda 3 G20 TOURING comes standard with 215/45 R18 89W front tyres and 215/45 R18 89W rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2020 Mazda Mazda 3 G20 TOURING has a 150mm ground clearance with a 1200kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 4.105.
The Mazda Mazda 3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0BP2H7601123456.
