The 2020 Mazda 3 G20 EVOLVE VISION is a front-wheel drive four-door sedan that was released to the Australian market on 32nd February 2019
classified as a BP. The Mazda 3 is regarded as a 4d sedan built in Japan with prices from a dealer as a used car starting at $24,800.
The Mazda 3 is a front-wheel drive 4 door with 5 seats, powered by a 2.0L INLINE 4 engine that has 114 kW of power (at 6000 rpm) and 200 Nm of torque (at 4000 rpm) via a Six-speed Automatic. Mazda claims the Mazda 3 G20 EVOLVE VISION uses 6.1L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 144g of CO2. It has a 51L fuel tank, meaning it should be able to travel 836km per full tank.
The Mazda 3 measures 1440mm (56.7 inches) in height, 4660mm (183.5 inches) in length, 1795mm (70.7 inches) in width with a 2725mm (107.3 inches) wheelbase that brings about a total of 1339kg (2952.0 lbs) of unladen weight. The Mazda 3 G20 EVOLVE VISION comes standard with 215/45 R18 89W front tyres and 215/45 R18 89W rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2020 Mazda 3 G20 EVOLVE VISION has a 150mm ground clearance with a 1200kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 3.85.
The Mazda 3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0BP2S7601123456.
