The 2020 Cerato Kia
S is a front-wheel drive four-door sedan that was released to the Australian market on 152nd June 2019
classified as a BD MY20. The Kia Cerato is regarded as a 4d sedan built in Korea with prices from a dealer as a used car starting at $16,800.
The Kia Cerato is a front-wheel drive 4 door with 5 seats, powered by a 2.0L INLINE 4 engine that has 112 kW of power (at 6200 rpm) and 192 Nm of torque (at 4000 rpm) via a Six-speed Manual. Kia claims the Cerato S uses 7.6L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 174g of CO2. It has a 50L fuel tank, meaning it should be able to travel 658km per full tank.
The Kia Cerato measures 1440mm (56.7 inches) in height, 4640mm (182.7 inches) in length, 1800mm (70.9 inches) in width with a 2700mm (106.3 inches) wheelbase that brings about a total of 1295kg (2855.0 lbs) of unladen weight. The Cerato S comes standard with 205/55 R16 front tyres and 205/55 R16 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 84 month, unlimitedkm warranty.
The 2020 Kia Cerato S has a 150mm ground clearance with a 1100kg braked and 610kg unbraked towing capacity. It has a final gear ratio of 4.188.
The Kia Cerato has received a 4 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the LHS - Lower Door Aperture. An example VIN number would be similar to KNAF%41C^#5123456.
