The 2016 Cerato Kia
KOUP Si is a front-wheel drive two-door coupe that was released to the Australian market on 335th December 2015
classified as a YD MY16. The Kia Cerato is regarded as a 2d coupe built in Korea with prices from a dealer as a used car starting at $12,900.
The Kia Cerato is a front-wheel drive 2 door with 5 seats, powered by a 2.0L INLINE 4 engine that has 129 kW of power (at 6500 rpm) and 209 Nm of torque (at 4700 rpm) via a Six-speed Manual. Kia claims the Cerato KOUP Si uses 7.3L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 175g of CO2. It has a 52L fuel tank, meaning it should be able to travel 712km per full tank.
The Kia Cerato measures 1410mm (55.5 inches) in height, 4530mm (178.3 inches) in length, 1780mm (70.1 inches) in width with a 2700mm (106.3 inches) wheelbase that brings about a total of 1288kg (2839.6 lbs) of unladen weight. The Cerato KOUP Si comes standard with 215/45 R17 front tyres and 215/45 R17 rear tyres. It requires a service every 6 months or 7,000 km, whichever comes first. It has a 84 month, unlimitedkm warranty.
The 2016 Kia Cerato KOUP Si has a 140mm ground clearance with a 1200kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 4.188.
The Kia Cerato has received a 5 star rating from ANCAP. The VIN number can be found on the RHS - Front Door Aperture and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to KNAF*618L*5123456.
