The 2014 Kia Cerato Si is a front-wheel drive four-door sedan that was released to the Australian market on 213th August 2013
classified as a YD MY14. The Kia Cerato is regarded as a 4d sedan built in Korea with prices from a dealer as a used car starting at $11,700.
The Kia Cerato is a front-wheel drive 4 door with 5 seats, powered by a 2.0L INLINE 4 engine that has 129 kW of power (at 6500 rpm) and 209 Nm of torque (at 4700 rpm) via a Six-speed Automatic. Kia claims the Cerato Si uses 7.4L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 177g of CO2. It has a 50L fuel tank, meaning it should be able to travel 676km per full tank.
The Kia Cerato measures 1435mm (56.5 inches) in height, 4560mm (179.5 inches) in length, 1780mm (70.1 inches) in width with a 2700mm (106.3 inches) wheelbase that brings about a total of 1319kg (2907.9 lbs) of unladen weight. The Cerato Si comes standard with 205/55 R16 front tyres and 205/55 R16 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2014 Kia Cerato Si has a 140mm ground clearance with a 1100kg braked and 610kg unbraked towing capacity. It has a final gear ratio of 3.064.
The Kia Cerato has received a 5 star rating from ANCAP. The VIN number can be found on the Under Driver Seat On Floor and the compliance plate is located on the LHS - Lower Door Aperture. An example VIN number would be similar to KNAFW418ME5000011.
