The 2020 Jeep Gladiator RUBICON (4x4) is a four-wheel drive dual cab utility that was released to the Australian market on 1st January 2020
classified as a JT MY20. The Jeep Gladiator is regarded as a dual cab utility built in United States Of America with prices from a dealer as a used car starting at $59,400.
The Jeep Gladiator is a four-wheel drive 4 door with 5 seats, powered by a 3.6L V6 engine that has 209 kW of power (at 6400 rpm) and 347 Nm of torque (at 4100 rpm) via an Eight-speed Automatic. Jeep claims the Gladiator RUBICON (4x4) uses 12.4L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 288g of CO2. It has a 83L fuel tank, meaning it should be able to travel 669km per full tank.
The Jeep Gladiator measures 1909mm (75.2 inches) in height, 5591mm (220.1 inches) in length, 1894mm (74.6 inches) in width with a 3488mm (137.3 inches) wheelbase that brings about a total of 2215kg (4883.2 lbs) of unladen weight. The Gladiator RUBICON (4x4) comes standard with 255/75 R17 front tyres and 255/75 R17 rear tyres. It requires a service every 12 months or 12,000 km, whichever comes first. It has a 60 month, 100km warranty.
The 2020 Jeep Gladiator RUBICON (4x4) has a 249mm ground clearance with a 2721kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 4.1.
The Jeep Gladiator has received a 3 star rating from ANCAP. The VIN number can be found on the Mid Driver Side Chassis and the compliance plate is located on the RH Side Lower B-Pillar. An example VIN number would be similar to 1C6JJTDG*#L133109.
