1. Home
    2. Research
    3. Infiniti
    4. Q70
    5. 2019
    6. Price & Specs
    7. 3.7 S PREMIUM
    Infiniti Q70

    2019 Infiniti Q70 3.7 S Premium Pricing and Spec

    From

    $30,100

    excl. on-roads

    Overview

    The 2019 Infiniti Q70 3.7 S PREMIUM is a rear wheel drive 4 Door Sedan that was released to the Australian market on 2nd January 2016 classified as a MY16. The Infiniti Q70 is regarded as a large built in Japan with prices from a dealer as a used car starting at $30,100.

    The Infiniti Q70 is a rear wheel drive 4 door with 5 seats, powered by a 3.7L V6 engine that has 235 kW of power (at 7000 rpm) and 360 Nm of torque (at 5200 rpm) via a 7 Speed Automatic. Infiniti claims the Q70 3.7 S PREMIUM uses 10.2L/100km of premium unleaded petrol in the combined city and highway cycle while putting out 235g of CO2. It has a 80L fuel tank, meaning it should be able to travel 784km per full tank.

    The Infiniti Q70 measures 1500mm (59.1 inches) in height, 4945mm (194.7 inches) in length, 1845mm (72.6 inches) in width with a 2900mm (114.2 inches) wheelbase that brings about a total of 1702kg (3752.3 lbs) of unladen weight. The Q70 3.7 S PREMIUM comes standard with 245/40 R20 front tyres and 245/40 R20 rear tyres. It requires a service every 12 months or 20,000 km, whichever comes first. It has a 48 month, 100km warranty.

    The 2019 Infiniti Q70 3.7 S PREMIUM has a 151mm ground clearance with a 1500kg braked and 750kg unbraked towing capacity.

    The VIN number can be found on the Driver Side Eng Scuttle and the compliance plate is located on the Lower Pass Side B-Pillar. An example VIN number would be similar to JN1B#AY51A0123456.

    Best For
    Warranty
    4Years
    or
    100,000km
    Fuel Efficiency
    80 L784 km
    4 Door Sedan
    petrol
    3.7L
    RWD
    7 AT
    5
    4

    Dimensions

    1500mm
    1845mm
    4945mm

    The dimensions shown above are for the base model.

    Specifications

    TypeMulti Point Fuel Injection
    Size (cc)3696
    Size (L)-
    InductionV6
    CamshaftVARIABLE DOUBLE OVERHEAD CAM
    Valves/Ports per Cylinder24
    Power235kW
    Power RPM7000
    Torque360Nm
    Torque RPM5200
    Bore Stroke95.5x86
    Compression Ratio11.00

    Transmission7 Speed Automatic
    Final Gear Ratio0.000
    Suspension Frontanti roll bar, coil spring, double wishbone, gas damper
    Suspension Rearanti roll bar, multi-link system, coil spring, gas damper
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveRWD

    Fuel Combined (L/100km)10.2
    Fuel Urban (L/100km)-
    Fuel Extra Urban (L/100km)-
    Tank Size (L)80
    Fuel Typepremium unleaded petrol
    e10 Compatible-
    CO2 Combined235
    CO2 Urban-
    CO2 Extra Urban-

    Brake FrontDISC - VENTILATED
    Brake RearDISC - VENTILATED
    Tyre Front245/40 R20
    Tyre Rear245/40 R20
    Front Rim Size9x20
    Rear Rim Size9x20

    Vehicle Height (mm)1500
    Vehicle Length (mm)4945
    Vehicle Width (mm)1845
    Ground Clearance (mm)151
    Wheelbase (mm)2900
    Turning Circle (m)11.2
    Unladen Weight (kg)1702
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)2310
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)1500
    Towing Capacity Unbraked (kg)750

    Compliance Plate LocationLower Pass Side B-Pillar
    Country Of OriginJapan
    Number of Doors4
    Seats5
    Service Interval KMs20
    Service Interval Months12
    VIN LocationDriver Side Eng Scuttle
    VIN NumberJN1B#AY51A0123456
    Warranty KMs100
    Warranty Months48
    Discontinued Date31/10/2020

    ANCAP Rating-
    Euro Air Pollution Standard-