Overview
The 2017 Infiniti Q60 3.7 GT PREMIUM is a rear wheel drive 2 Door Coupe that was released to the Australian market on 1st January 2014 classified as a . The Infiniti Q60 is regarded as a sports built in Japan with prices from a dealer as a used car starting at $24,400.
The Infiniti Q60 is a rear wheel drive 2 door with 4 seats, powered by a 3.7L V6 engine that has 235 kW of power (at 7000 rpm) and 360 Nm of torque (at 5200 rpm) via a 7 Speed Automatic. Infiniti claims the Q60 3.7 GT PREMIUM uses 10.5L/100km of premium unleaded petrol in the combined city and highway cycle while putting out 246g of CO2. It has a 80L fuel tank, meaning it should be able to travel 762km per full tank.
The Infiniti Q60 measures 1387mm (54.6 inches) in height, 4655mm (183.3 inches) in length, 1820mm (71.7 inches) in width with a 2850mm (112.2 inches) wheelbase that brings about a total of 1670kg (3681.7 lbs) of unladen weight. The Q60 3.7 GT PREMIUM comes standard with 225/50 R18 front tyres and 245/45 R18 rear tyres. It requires a service every 12 months or 20,000 km, whichever comes first. It has a 48 month, 100km warranty.
The 2017 Infiniti Q60 3.7 GT PREMIUM has a 132mm ground clearance
The VIN number can be found on the Driver Side Eng Scuttle and the compliance plate is located on the Lower Pass Side B-Pillar. An example VIN number would be similar to JN1GCAV36A0123456.
Dimensions
The dimensions shown above are for the base model.
Specifications
| Type | Multi Point Fuel Injection |
|---|---|
| Size (cc) | 3696 |
| Size (L) | - |
| Induction | V6 |
| Camshaft | VARIABLE DOUBLE OVERHEAD CAM |
| Valves/Ports per Cylinder | 24 |
| Power | 235kW |
| Power RPM | 7000 |
| Torque | 360Nm |
| Torque RPM | 5200 |
| Bore Stroke | 95.25x86.10 |
| Compression Ratio | 11.00 |
| Transmission | 7 Speed Automatic |
|---|---|
| Final Gear Ratio | 0.000 |
| Suspension Front | anti roll bar, coil spring, double wishbone, gas damper |
| Suspension Rear | anti roll bar, multi-link system, coil spring, gas damper |
| Steering Mechanism | RACK & PINION - POWER ASSISTED |
| Drive | RWD |
| Fuel Combined (L/100km) | 10.5 |
|---|---|
| Fuel Urban (L/100km) | - |
| Fuel Extra Urban (L/100km) | - |
| Tank Size (L) | 80 |
| Fuel Type | premium unleaded petrol |
| e10 Compatible | - |
| CO2 Combined | 246 |
| CO2 Urban | - |
| CO2 Extra Urban | - |
| Brake Front | DISC - VENTILATED |
|---|---|
| Brake Rear | DISC - VENTILATED |
| Tyre Front | 225/50 R18 |
| Tyre Rear | 245/45 R18 |
| Front Rim Size | 8x18 |
| Rear Rim Size | 8x18 |
| Vehicle Height (mm) | 1387 |
|---|---|
| Vehicle Length (mm) | 4655 |
| Vehicle Width (mm) | 1820 |
| Ground Clearance (mm) | 132 |
| Wheelbase (mm) | 2850 |
| Turning Circle (m) | 11.0 |
| Unladen Weight (kg) | 1670 |
| Gross Combined Weight (kg) | - |
| Gross Vehicle Weight (kg) | 2410 |
| Track Front | - |
| Track Rear | - |
| Towing Capacity Brake (kg) | - |
| Towing Capacity Unbraked (kg) | - |
| Compliance Plate Location | Lower Pass Side B-Pillar |
|---|---|
| Country Of Origin | Japan |
| Number of Doors | 2 |
| Seats | 4 |
| Service Interval KMs | 20 |
| Service Interval Months | 12 |
| VIN Location | Driver Side Eng Scuttle |
| VIN Number | JN1GCAV36A0123456 |
| Warranty KMs | 100 |
| Warranty Months | 48 |
| Discontinued Date | 31/07/2018 |
| ANCAP Rating | - |
|---|---|
| Euro Air Pollution Standard | - |