2016 Hyundai i30 Tourer Elite 1.6 Crdi Pricing and Spec
From
$16,500
excl. on-roads
Overview
The 2016 Hyundai I30 TOURER ELITE 1.6 CRDi is a front wheel drive 4 Door Wagon that was released to the Australian market on 2nd January 2016 classified as a GDe4. The Hyundai I30 is regarded as a small built in Czech Republic with prices from a dealer as a used car starting at $16,500.
The Hyundai I30 is a front wheel drive 4 door with 5 seats, powered by a 1.6L Diesel Turbo 4 Cylinder engine that has 100 kW of power (at 4500 rpm) and 300 Nm of torque (at 1750 rpm) via a 7 Speed Auto Dual Clutch. Hyundai claims the i30 TOURER ELITE 1.6 CRDi uses 4.8L/100km of diesel in the combined city and highway cycle while putting out 151g of CO2. It has a 53L fuel tank, meaning it should be able to travel 1104km per full tank.
The Hyundai I30 measures 1500mm (59.1 inches) in height, 4485mm (176.6 inches) in length, 1780mm (70.1 inches) in width with a 2650mm (104.3 inches) wheelbase that brings about a total of 1456kg (3209.9 lbs) of unladen weight. The i30 TOURER ELITE 1.6 CRDi comes standard with 205/55 R16 front tyres and 205/55 R16 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, unlimited kilometre warranty.
The 2016 Hyundai I30 TOURER ELITE 1.6 CRDi has a 140mm ground clearance with a 1500kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 3.087.
The Hyundai I30 has received a 5 star rating from ANCAP. The VIN number can be found on the Under Driver Seat On Floor and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to TMAD181ULBJ123456.
Pros
- Myriad variants to choose from
- Well-sorted ride and handling
- N versions are proper dynamos
Cons
- Too much tyre noise
- 1.6 turbo's shorter service intervals
- N Line hatches lose some driver-assist features
Dimensions
The dimensions shown above are for the base model.
Specifications
| Type | Turbo Common Rail Diesel Injection |
|---|---|
| Size (cc) | 1582 |
| Size (L) | - |
| Induction | Diesel Turbo 4 Cylinder |
| Camshaft | DUAL OVERHEAD CAM |
| Valves/Ports per Cylinder | 16 |
| Power | 100kW |
| Power RPM | 4500 |
| Torque | 300Nm |
| Torque RPM | 1750 |
| Bore Stroke | 77.2x84.5 |
| Compression Ratio | 17.30 |
| Transmission | 7 Speed Auto Dual Clutch |
|---|---|
| Final Gear Ratio | 3.087 |
| Suspension Front | anti roll bar, coil spring, gas damper, macpherson strut |
| Suspension Rear | anti roll bar, multi-link system, coil spring, gas damper |
| Steering Mechanism | RACK & PINION - POWER ASSISTED |
| Drive | FWD |
| Fuel Combined (L/100km) | 4.8 |
|---|---|
| Fuel Urban (L/100km) | - |
| Fuel Extra Urban (L/100km) | - |
| Tank Size (L) | 53 |
| Fuel Type | diesel |
| e10 Compatible | - |
| CO2 Combined | 151 |
| CO2 Urban | - |
| CO2 Extra Urban | - |
| Brake Front | DISC - VENTILATED |
|---|---|
| Brake Rear | DISC |
| Tyre Front | 205/55 R16 |
| Tyre Rear | 205/55 R16 |
| Front Rim Size | 6.5x16 |
| Rear Rim Size | 6.5x16 |
| Vehicle Height (mm) | 1500 |
|---|---|
| Vehicle Length (mm) | 4485 |
| Vehicle Width (mm) | 1780 |
| Ground Clearance (mm) | 140 |
| Wheelbase (mm) | 2650 |
| Turning Circle (m) | 10.0 |
| Unladen Weight (kg) | 1456 |
| Gross Combined Weight (kg) | - |
| Gross Vehicle Weight (kg) | - |
| Track Front | - |
| Track Rear | - |
| Towing Capacity Brake (kg) | 1500 |
| Towing Capacity Unbraked (kg) | 600 |
| Compliance Plate Location | Pass Side Lower A-Pillar |
|---|---|
| Country Of Origin | Czech Republic |
| Number of Doors | 4 |
| Seats | 5 |
| Service Interval KMs | 15 |
| Service Interval Months | 12 |
| VIN Location | Under Driver Seat On Floor |
| VIN Number | TMAD181ULBJ123456 |
| Warranty KMs | 999 |
| Warranty Months | 60 |
| Discontinued Date | 31/03/2016 |
| ANCAP Rating | 5 |
|---|---|
| Euro Air Pollution Standard | - |