The 2017 Genesis G80 3.8 ULTIMATE is a rear-wheel drive four-door sedan that was released to the Australian market on 244th September 2017
classified as a . The Genesis G80 is regarded as a 4d sedan built in Korea with prices from a dealer as a used car starting at $34,600.
The Genesis G80 is a rear-wheel drive 4 door with 5 seats, powered by a 3.8L V6 engine that has 232 kW of power (at 6000 rpm) and 397 Nm of torque (at 5000 rpm) via an Eight-speed Automatic. Genesis claims the G80 3.8 ULTIMATE uses 10.8L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 247g of CO2. It has a 77L fuel tank, meaning it should be able to travel 713km per full tank.
The Genesis G80 measures 1480mm (58.3 inches) in height, 4990mm (196.5 inches) in length, 1890mm (74.4 inches) in width with a 3010mm (118.5 inches) wheelbase that brings about a total of 1920kg (4232.9 lbs) of unladen weight. The G80 3.8 ULTIMATE comes standard with 245/40 R19 94W front tyres and 275/35 R19 96W rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2017 Genesis G80 3.8 ULTIMATE has a 135mm ground clearance It has a final gear ratio of 3.909.
The Genesis G80 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to KMHGM41EMEU123456.
