1. Home
    2. Research
    3. BMW
    4. 7 Series
    5. 2020
    6. Price & Specs
    7. 30d M SPORT
    BMW 7 Series

    2020 BMW 7 Series 30d M SPORT Pricing and Spec

    From

    $96,700

    excl. on-roads

    Overview

    The 2020 BMW 7 Series 30d M SPORT is a rear-wheel drive four-door sedan that was released to the Australian market on 182nd July 2019 classified as a G11. The BMW 7 Series is regarded as a 4d sedan built in Germany with prices from a dealer as a used car starting at $96,700.

    The BMW 7 Series is a rear-wheel drive 4 door with 5 seats, powered by a 3.0L DIESEL TURBO 6 engine that has 195 kW of power (at 4000 rpm) and 620 Nm of torque (at 2000 rpm) via an Eight-speed Auto Steptronic Sprt. BMW claims the 7 Series 30d M SPORT uses 5L/100km of Diesel in the combined city and highway cycle while putting out 131g of CO2. It has a 78L fuel tank, meaning it should be able to travel 1560km per full tank.

    The BMW 7 Series measures 1467mm (57.8 inches) in height, 5120mm (201.6 inches) in length, 1902mm (74.9 inches) in width with a 3070mm (120.9 inches) wheelbase that brings about a total of 1769kg (3900.0 lbs) of unladen weight. The 7 Series 30d M SPORT comes standard with 245/40 R20 front tyres and 275/35 R20 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.

    The 2020 BMW 7 Series 30d M SPORT has a 135mm ground clearance with a 2100kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 2.563.

    The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to WBA7U220%0BP55565.

    Best For
    Family
    Long distance
    Luxury
    Warranty
    3Years
    or
    unlimited km
    Fuel Efficiency
    78 L1560 km
    4D SEDAN
    DIESEL
    3.0L
    REAR WHEEL DRIVE
    8 AT
    5
    4

    Dimensions

    1467mm
    1902mm
    5120mm

    The dimensions shown above are for the base model.

    Specifications

    TypeTURBO CDI
    Size (cc)2993
    Size (L)3.0L
    InductionDIESEL TURBO 6
    CamshaftDUAL OVERHEAD CAM
    Valves/Ports per Cylinder24
    Power195kW
    Power RPM4000
    Torque620Nm
    Torque RPM2000
    Bore Stroke-
    Compression Ratio16.5

    Transmission8 SP AUTO STEPTRONIC SPRT
    Final Gear Ratio2.563
    Suspension Front-
    Suspension Rear-
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveREAR WHEEL DRIVE

    Fuel Combined (L/100km)5
    Fuel Urban (L/100km)5.9
    Fuel Extra Urban (L/100km)4.4
    Tank Size (L)78
    Fuel TypeDIESEL
    e10 Compatibleunknown
    CO2 Combined131
    CO2 Urban155
    CO2 Extra Urban117

    Brake FrontDISC - VENTILATED
    Brake RearDISC - VENTILATED
    Tyre Front245/40 R20
    Tyre Rear275/35 R20
    Front Rim Size8.5Jx20
    Rear Rim Size10Jx20

    Vehicle Height (mm)1467
    Vehicle Length (mm)5120
    Vehicle Width (mm)1902
    Ground Clearance (mm)135
    Wheelbase (mm)3070
    Turning Circle (m)12.3
    Unladen Weight (kg)1769
    Gross Combined Weight (kg)0
    Gross Vehicle Weight (kg)0
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)2100
    Towing Capacity Unbraked (kg)750

    Compliance Plate LocationPass Side Lower B-Pillar
    Country Of OriginGERMANY
    Number of Doors4
    Seats5
    Service Interval KMs15
    Service Interval Months12
    VIN LocationDriver Side Inner Guard
    VIN NumberWBA7U220%0BP55565
    Warranty KMs-
    Warranty Months36
    Discontinued Date2020-02-28

    ANCAP Rating-
    Euro Air Pollution StandardEURO 5