The 2013 BMW 4 Series 28i LUXURY LINE is a rear-wheel drive two-door coupe that was released to the Australian market on 274th October 2013
classified as a F32. The BMW 4 Series is regarded as a 2d coupe built in Germany with prices from a dealer as a used car starting at $23,500.
The BMW 4 Series is a rear-wheel drive 2 door with 4 seats, powered by a 2.0L TURBO 4 engine that has 180 kW of power (at 5000 rpm) and 350 Nm of torque (at 1250 rpm) via an Eight-speed Automatic. BMW claims the 4 Series 28i LUXURY LINE uses 6.4L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 149g of CO2. It has a 60L fuel tank, meaning it should be able to travel 938km per full tank.
The BMW 4 Series measures 1377mm (54.2 inches) in height, 4638mm (182.6 inches) in length, 1825mm (71.9 inches) in width with a 2810mm (110.6 inches) wheelbase that brings about a total of 1545kg (3406.1 lbs) of unladen weight. The 4 Series 28i LUXURY LINE comes standard with 225/40 R19 front tyres and 255/35 R19 rear tyres. It requires a service every 24 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2013 BMW 4 Series 28i LUXURY LINE has a 130mm ground clearance with a 1600kg braked and 745kg unbraked towing capacity. It has a final gear ratio of 3.154.
The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to WBA3N32%0E0000011.
