The 2012 Audi S4 3.0 TFSI QUATTRO is an all-wheel drive four-door sedan that was released to the Australian market on 274th October 2011
classified as a B8 (8K) MY12. The Audi S4 is regarded as a 4d sedan built in Germany with prices from a dealer as a used car starting at $27,800.
The Audi S4 is an all-wheel drive 4 door with 5 seats, powered by a 3.0L SUPERCHARGED V6 engine that has 245 kW of power (at 5500 rpm) and 440 Nm of torque (at 2900 rpm) via a Seven-speed Auto Direct Shift. Audi claims the S4 3.0 TFSI QUATTRO uses 9.4L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 219g of CO2. It has a 64L fuel tank, meaning it should be able to travel 681km per full tank.
The Audi S4 measures 1406mm (55.4 inches) in height, 4717mm (185.7 inches) in length, 1826mm (71.9 inches) in width with a 2811mm (110.7 inches) wheelbase that brings about a total of 1685kg (3714.8 lbs) of unladen weight. The S4 3.0 TFSI QUATTRO comes standard with 245/40 R18 front tyres and 245/40 R18 rear tyres. It requires a service every 24 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2012 Audi S4 3.0 TFSI QUATTRO has a 118mm ground clearance with a 1900kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.875.
The VIN number can be found on the Driver Side Front Wheel Arch and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WAUZZZ8KX9A123456.
