1. Home
    2. Research
    3. Audi
    4. S3
    5. 2017
    6. Price & Specs
    7. 2.0 TFSI QUATTRO LIMITED EDT
    Audi S3

    2017 Audi S3 2.0 Tfsi Quattro Limited Edt Pricing and Spec

    From

    $42,900

    excl. on-roads

    Overview

    The 2017 Audi S3 2.0 TFSI QUATTRO LIMITED EDT is an all wheel drive 4 Door Sedan that was released to the Australian market on 9th January 2017 classified as a 8V MY18. The Audi S3 is regarded as a small built in Germany with prices from a dealer as a used car starting at $42,900.

    The Audi S3 is an all wheel drive 4 door with 5 seats, powered by a 2.0L Turbo 4 Cylinder engine that has 213 kW of power (at 5100 rpm) and 380 Nm of torque (at 1800 rpm) via a 7 Speed Auto S Tronic. Audi claims the S3 2.0 TFSI QUATTRO LIMITED EDT uses 6.5L/100km of premium unleaded petrol in the combined city and highway cycle while putting out 151g of CO2. It has a 55L fuel tank, meaning it should be able to travel 846km per full tank.

    The Audi S3 measures 1402mm (55.2 inches) in height, 4469mm (175.9 inches) in length, 1796mm (70.7 inches) in width with a 2628mm (103.5 inches) wheelbase that brings about a total of 1545kg (3406.1 lbs) of unladen weight. The S3 2.0 TFSI QUATTRO LIMITED EDT comes standard with 225/40 R18 front tyres and 225/40 R18 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, unlimited kilometre warranty.

    The 2017 Audi S3 2.0 TFSI QUATTRO LIMITED EDT has a 115mm ground clearance It has a final gear ratio of 3.304.

    The VIN number can be found on the RHS - Front Suspension Tower and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WAUZZZ8VXHA123456.

    Best For
    Family
    City driving
    Luxury
    Warranty
    3Years
    or
    unlimited km
    Fuel Efficiency
    55 L846 km
    4 Door Sedan
    petrol
    2.0L
    AWD
    7 AT
    5
    4

    Dimensions

    1402mm
    1796mm
    4469mm

    The dimensions shown above are for the base model.

    Specifications

    TypeTurbo Direct Fuel Injection
    Size (cc)1984
    Size (L)-
    InductionTurbo 4 Cylinder
    CamshaftDUAL OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power213kW
    Power RPM5100
    Torque380Nm
    Torque RPM1800
    Bore Stroke82.5x92.8
    Compression Ratio9.30

    Transmission7 Speed Auto S Tronic
    Final Gear Ratio3.304
    Suspension Frontanti roll bar, coil spring, gas damper, macpherson strut, lower wishbone
    Suspension Rearanti roll bar, multi-link system, coil spring, gas damper
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveAWD

    Fuel Combined (L/100km)6.5
    Fuel Urban (L/100km)8.3
    Fuel Extra Urban (L/100km)5.5
    Tank Size (L)55
    Fuel Typepremium unleaded petrol
    e10 Compatible-
    CO2 Combined151
    CO2 Urban191
    CO2 Extra Urban128

    Brake FrontDISC - VENTILATED
    Brake RearDISC - VENTILATED
    Tyre Front225/40 R18
    Tyre Rear225/40 R18
    Front Rim Size8x18
    Rear Rim Size8x18

    Vehicle Height (mm)1402
    Vehicle Length (mm)4469
    Vehicle Width (mm)1796
    Ground Clearance (mm)115
    Wheelbase (mm)2628
    Turning Circle (m)11.0
    Unladen Weight (kg)1545
    Gross Combined Weight (kg)2020
    Gross Vehicle Weight (kg)1980
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)-
    Towing Capacity Unbraked (kg)-

    Compliance Plate LocationPass Side Lower A-Pillar
    Country Of OriginGermany
    Number of Doors4
    Seats5
    Service Interval KMs15
    Service Interval Months12
    VIN LocationRHS - Front Suspension Tower
    VIN NumberWAUZZZ8VXHA123456
    Warranty KMs999
    Warranty Months36
    Discontinued Date30/11/2018

    ANCAP Rating-
    Euro Air Pollution StandardEURO 6