2017 Audi S3 2.0 TFSI QUATTRO BLACK EDITION Pricing and Spec
From
$45,700
excl. on-roads
Overview
The 2017 Audi S3 2.0 TFSI QUATTRO BLACK EDITION is an all-wheel drive four-door sedan that was released to the Australian market on 244th September 2017 classified as a 8V MY18. The Audi S3 is regarded as a 4d sedan built in Germany with prices from a dealer as a used car starting at $45,700.
The Audi S3 is an all-wheel drive 4 door with 5 seats, powered by a 2.0L TURBO 4 engine that has 213 kW of power (at 5100 rpm) and 380 Nm of torque (at 1800 rpm) via a Six-speed Manual. Audi claims the S3 2.0 TFSI QUATTRO BLACK EDITION uses 7.1L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 165g of CO2. It has a 55L fuel tank, meaning it should be able to travel 775km per full tank.
The Audi S3 measures 1402mm (55.2 inches) in height, 4469mm (175.9 inches) in length, 1796mm (70.7 inches) in width with a 2628mm (103.5 inches) wheelbase that brings about a total of 1505kg (3318.0 lbs) of unladen weight. The S3 2.0 TFSI QUATTRO BLACK EDITION comes standard with 225/40 R18 front tyres and 225/40 R18 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2017 Audi S3 2.0 TFSI QUATTRO BLACK EDITION has a 115mm ground clearance It has a final gear ratio of 3.087.
The VIN number can be found on the RHS - Front Suspension Tower and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WAUZZZ8VXHA123456.
Dimensions
The dimensions shown above are for the base model.
Specifications
| Type | TURBO DIRECT F/INJ |
|---|---|
| Size (cc) | 1984 |
| Size (L) | 2.0L |
| Induction | TURBO 4 |
| Camshaft | DUAL OVERHEAD CAM |
| Valves/Ports per Cylinder | 16 |
| Power | 213kW |
| Power RPM | 5100 |
| Torque | 380Nm |
| Torque RPM | 1800 |
| Bore Stroke | - |
| Compression Ratio | 9.3 |
| Transmission | 6 SP MANUAL |
|---|---|
| Final Gear Ratio | 3.087 |
| Suspension Front | - |
| Suspension Rear | - |
| Steering Mechanism | RACK & PINION - POWER ASSISTED |
| Drive | ALL WHEEL DRIVE |
| Fuel Combined (L/100km) | 7.1 |
|---|---|
| Fuel Urban (L/100km) | 9.2 |
| Fuel Extra Urban (L/100km) | 5.9 |
| Tank Size (L) | 55 |
| Fuel Type | PREMIUM UNLEADED PETROL |
| e10 Compatible | unknown |
| CO2 Combined | 165 |
| CO2 Urban | 213 |
| CO2 Extra Urban | 138 |
| Brake Front | DISC - VENTILATED |
|---|---|
| Brake Rear | DISC - VENTILATED |
| Tyre Front | 225/40 R18 |
| Tyre Rear | 225/40 R18 |
| Front Rim Size | 8x18 |
| Rear Rim Size | 8x18 |
| Vehicle Height (mm) | 1402 |
|---|---|
| Vehicle Length (mm) | 4469 |
| Vehicle Width (mm) | 1796 |
| Ground Clearance (mm) | 115 |
| Wheelbase (mm) | 2628 |
| Turning Circle (m) | 11 |
| Unladen Weight (kg) | 1505 |
| Gross Combined Weight (kg) | 2020 |
| Gross Vehicle Weight (kg) | 1980 |
| Track Front | - |
| Track Rear | - |
| Towing Capacity Brake (kg) | 0 |
| Towing Capacity Unbraked (kg) | 0 |
| Compliance Plate Location | Pass Side Lower A-Pillar |
|---|---|
| Country Of Origin | GERMANY |
| Number of Doors | 4 |
| Seats | 5 |
| Service Interval KMs | 15 |
| Service Interval Months | 12 |
| VIN Location | RHS - Front Suspension Tower |
| VIN Number | WAUZZZ8VXHA123456 |
| Warranty KMs | - |
| Warranty Months | 36 |
| Discontinued Date | 2018-11-30 |
| ANCAP Rating | - |
|---|---|
| Euro Air Pollution Standard | EURO 6 |