2014 Audi A7 S/BACK 3.0 TDI BITURBO QUATTRO Pricing and Spec

The 2014 Audi A7 S/BACK 3.0 TDI BITURBO QUATTRO is an all-wheel drive five-door hatchback that was released to the Australian market on 244th September 2013 classified as a 4G MY14. The Audi A7 is regarded as a 5d hatchback built in Germany with prices from a dealer as a used car starting at $41,900.

The Audi A7 is an all-wheel drive 5 door with 5 seats, powered by a 3.0L DIESEL TURBO V6 engine that has 230 kW of power (at 3900 rpm) and 650 Nm of torque (at 1450 rpm) via an Eight-speed Automatic Tiptronic. Audi claims the A7 S/BACK 3.0 TDI BITURBO QUATTRO uses 6.4L/100km of Diesel in the combined city and highway cycle while putting out 169g of CO₂. It has a 75L fuel tank, meaning it should be able to travel 1172km per full tank.

The Audi A7 measures 1420mm (55.9 inches) in height, 4969mm (195.6 inches) in length, 1911mm (75.2 inches) in width with a 2914mm (114.7 inches) wheelbase that brings about a total of 1925kg (4243.9 lbs) of unladen weight. The A7 S/BACK 3.0 TDI BITURBO QUATTRO comes standard with 255/40 R19 front tyres and 255/40 R19 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.

The 2014 Audi A7 S/BACK 3.0 TDI BITURBO QUATTRO has a 113mm ground clearance with a 1800kg braked and 750kg unbraked towing capacity.

The VIN number can be found on the Driver Side Front Wheel Arch and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WAUZZZ4GXBN123456.