The 2019 Audi A6 3.0 TDI QUATTRO S TRONIC is an all-wheel drive four-door sedan that was released to the Australian market on 213th August 2017
classified as a 4GL MY18. The Audi A6 is regarded as a 4d sedan built in Germany with prices from a dealer as a used car starting at $36,700.
The Audi A6 is an all-wheel drive 4 door with 5 seats, powered by a 3.0L DIESEL TURBO V6 engine that has 160 kW of power (at 3250 rpm) and 500 Nm of torque (at 1250 rpm) via a Seven-speed Automatic. Audi claims the A6 3.0 TDI QUATTRO S TRONIC uses 5.2L/100km of Diesel in the combined city and highway cycle while putting out 136g of CO2. It has a 75L fuel tank, meaning it should be able to travel 1442km per full tank.
The Audi A6 measures 1465mm (57.7 inches) in height, 4927mm (194.0 inches) in length, 1874mm (73.8 inches) in width with a 2921mm (115.0 inches) wheelbase that brings about a total of 1765kg (3891.2 lbs) of unladen weight. The A6 3.0 TDI QUATTRO S TRONIC comes standard with 255/40 R19 front tyres and 255/40 R19 rear tyres. It requires a service every 12 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2019 Audi A6 3.0 TDI QUATTRO S TRONIC has a 126mm ground clearance with a 2000kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.875.
The VIN number can be found on the Driver Side Front Wheel Arch and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WAUZZZ4GXBN123456.
