The 2019 Audi A6 3.0 TDI BITURBO BLACK ED is an all-wheel drive four-door sedan that was released to the Australian market on 213th August 2017
classified as a 4GL MY18. The Audi A6 is regarded as a 4d sedan built in Germany with prices from a dealer as a used car starting at $51,400.
The Audi A6 is an all-wheel drive 4 door with 5 seats, powered by a 3.0L DIESEL TURBO V6 engine that has 235 kW of power (at 3900 rpm) and 650 Nm of torque (at 1450 rpm) via an Eight-speed Automatic Tiptronic. Audi claims the A6 3.0 TDI BITURBO BLACK ED uses 6.1L/100km of Diesel in the combined city and highway cycle while putting out 161g of CO2. It has a 75L fuel tank, meaning it should be able to travel 1230km per full tank.
The Audi A6 measures 1465mm (57.7 inches) in height, 4927mm (194.0 inches) in length, 1874mm (73.8 inches) in width with a 2921mm (115.0 inches) wheelbase that brings about a total of 1835kg (4045.5 lbs) of unladen weight. The A6 3.0 TDI BITURBO BLACK ED comes standard with 255/35 R20 front tyres and 255/35 R20 rear tyres. It requires a service every 12 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2019 Audi A6 3.0 TDI BITURBO BLACK ED has a 126mm ground clearance with a 2000kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 2.375.
The VIN number can be found on the Driver Side Front Wheel Arch and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WAUZZZ4GXBN123456.
