The 2019 Audi A6 1.8 TFSI S TRONIC is a front-wheel drive four-door sedan that was released to the Australian market on 213th August 2017
classified as a 4GL MY18. The Audi A6 is regarded as a 4d sedan built in Germany with prices from a dealer as a used car starting at $23,200.
The Audi A6 is a front-wheel drive 4 door with 5 seats, powered by a 1.8L TURBO 4 engine that has 140 kW of power (at 4200 rpm) and 320 Nm of torque (at 1400 rpm) via a Seven-speed Auto Dual Clutch. Audi claims the A6 1.8 TFSI S TRONIC uses 5.7L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 133g of CO2. It has a 70L fuel tank, meaning it should be able to travel 1228km per full tank.
The Audi A6 measures 1465mm (57.7 inches) in height, 4927mm (194.0 inches) in length, 1874mm (73.8 inches) in width with a 2921mm (115.0 inches) wheelbase that brings about a total of 1570kg (3461.3 lbs) of unladen weight. The A6 1.8 TFSI S TRONIC comes standard with 245/45 R18 front tyres and 245/45 R18 rear tyres. It requires a service every 12 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2019 Audi A6 1.8 TFSI S TRONIC has a 126mm ground clearance with a 1500kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 4.41.
The VIN number can be found on the Driver Side Front Wheel Arch and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WAUZZZ4GXBN123456.
