The 2018 Audi A6 2.0 TDI BLACK EDITION is a front-wheel drive four-door sedan that was released to the Australian market on 213th August 2017
classified as a 4GL MY18. The Audi A6 is regarded as a 4d sedan built in Germany with prices from a dealer as a used car starting at $45,800.
The Audi A6 is a front-wheel drive 4 door with 5 seats, powered by a 2.0L DIESEL TURBO 4 engine that has 140 kW of power (at 3800 rpm) and 400 Nm of torque (at 1750 rpm) via a Seven-speed Auto Dual Clutch. Audi claims the A6 2.0 TDI BLACK EDITION uses 4.2L/100km of Diesel in the combined city and highway cycle while putting out 110g of CO2. It has a 73L fuel tank, meaning it should be able to travel 1738km per full tank.
The Audi A6 measures 1478mm (58.2 inches) in height, 4933mm (194.2 inches) in length, 1874mm (73.8 inches) in width with a 2912mm (114.6 inches) wheelbase that brings about a total of 1800kg (3968.3 lbs) of unladen weight. The A6 2.0 TDI BLACK EDITION comes standard with 255/35 R20 front tyres and 255/35 R20 rear tyres. It requires a service every 12 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2018 Audi A6 2.0 TDI BLACK EDITION has a 125mm ground clearance with a 1600kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 4.41.
The Audi A6 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Wheel Arch and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WAUZZZ4GZGN123456.
